Pioneer SX-LX03 manual Additional information, Setting up the remote to control your TV

Additional information 11

Changing the display mode

If no operation is performed for one minute, the front panel display and button illumination automatically turns off. The display will turn on again automatically if a command is input or movement is detected by the motion sensor.

To make the display remain on constantly, set the display mode to Display On.

	ENTER
1	Select ‘Display Mode’ from the
System Setup menu, then press ENTER.
	ENTER
2	Adjust the setting, then press

ENTER to confirm the settings and exit.

•Auto Display – Turns off automatically if no operation is performed for one minute.

•Display On – Displays constantly.

Even when set to not display, the display is temporarily shown when you carry out a control function.

•The motion sensor detects movement in the left/right and up/down directions within a distance of 2.5 m and an angle of 40º (20º only in the upper direction). Walking towards the unit will reduce the sensing range to 0.7 m.

Key lock setting

	ENTER
1	Select ‘Key Lock’ from the System
Setup menu, then press ENTER.
	ENTER
2	Adjust the setting, then press

ENTER to confirm the settings and exit.

•Lock On – Makes the front panel buttons and controls inoperative.

•Lock Off – Restores regular use of the front panel buttons and controls.

Setting up the remote to control your TV

You can use the supplied remote to control your TV. To be able to use this feature you first have to program the remote with a maker code from the following table.

1 2 3

4 5 6

7	8	9
1 CLEAR	0	Press and hold CLEAR and Use

the number buttons to input the maker code for your TV, and press ENTER.

See the following table for the list of maker codes. If there is more than one code given for your make, input the first one in the list.

•If the maker’s name of your TV doesn’t appear in the table, you will not be able to use this remote to control your TV.

2Point the remote towards your TV and press TV Control  to check that the remote works with your TV.

If the remote is set up correctly, the TV should switch off. If it doesn’t and there is another code given for your maker, repeat step 1 with a new code.

English Deutsch Français Italiano Nederlands Español

57

En