Pioneer SX-LX03 LFE Attenuate, DTS CD setting, Select a setting. Select one of the following

Surround sound settings 08

ENTER
2	Select ‘Virtual SB’, then press
ENTER.
3	Select a setting.

Select one of the following:

•Vir.SB On – Virtual Surround Back is always used (for example, on 5.1 encoded material).

•Vir.SB Off – Virtual Surround Back mode is switched off.

The V.SB indicator lights when Virtual Surround Back is active.

4 ENTER Press to exit.

LFE Attenuate

Some Dolby Digital and DTS audio sources include ultra-low bass tones.

Set the LFE attenuator as necessary to prevent the ultra-low bass tones from distorting the sound from the speakers.

SETUP

		ENTER
1	TOOLS	Open the ‘Sound Setup’ menu.
	ENTER
2		Select ‘LFE ATT’, then press ENTER.

3 Select a setting. Select one of the following:

•0dB – The LFE is not limited, which is the recommended value.

•-10dB– The LFE is limited by the respective degree.

•LFE Off – No sound is output from the LFE channel.

DTS CD setting

If you play a DTS-encoded CD, you will need to change this setting to hear the decoded signal.

SETUP

		ENTER
1	TOOLS	Open the ‘Sound Setup’
menu.
	ENTER
2		Select ‘CD Type’, then press ENTER.
3		Select a setting.

Select one of the following:

•Normal CD – Use for playback of regular audio CDs. Some DTS-encoded CDs will output noise when played.

•DTS-CD– Use for playback of DTS- encoded CDs, but note that the beginning of regular CD tracks may be skipped.

4 ENTER Press to exit.

English Deutsch Français Italiano Nederlands Español

4 ENTER Press to exit.

45

En