Pioneer SX-LX03 manual Getting Started Chapter, Making settings using the Setup Navigator menu

Getting Started

Chapter 3

Getting Started

Important

•Set the remote control operation selector switch to BD to operate the Blu-ray disc player.

RECEIVERBD iPod

Making settings using the Setup Navigator menu

Be sure to perform these settings when using the player for the first time.

Caution

•Before turning on the power, check that the connections between the player and other devices are correct.

BD

1 Turn on the power.

2Turn on the TV’s power and switch the input.

See the TV’s operating instructions for instructions on operating the TV.

Check that the Setup Navigator menu is displayed.

If TV Control is set, the TV can be operated with the receiver’s remote control (page 86).

03

If the Setup Navigator menu is not displayed

•Press HOME MENU to display the Home Menu, select Initial Setup  Setup Navigator  Start, then press ENTER.

	ENTER
3	Select the OSD language.

Use / to select, then press ENTER.

Setup Navigator

BD PLAYER

Please select the on-screen display language.

Audio, subtitle and BDMV/DVD-Video menu

language will also be set.

When you have this player connected to a Pioneer Flat Screen TV that is compatible with HDMI Control, language settings are imported from the Pioneer Flat Screen TV’s language settings before Setup Navigator begins.

	ENTER
4	Select and set the video and audio

output terminals.

Select the actually connected video and audio output terminals.

Use /// to select, then press ENTER.

Setup Navigator

BD PLAYER

Select the output terminals to be used for the video and audio signals of this player.

VideoHDMI

AudioHDMI

Use [ ][ ] to select video or audio, then press [ ][ ] to select the output terminal.

83

En