Pioneer SX-LX03 manual Speaker Setup Guide SX-LX08

Speaker Setup Guide (SX-LX08)

Connect the subwoofer.

•Use the RCA plug cable furnished with the speaker system (or commercial alternative) to connect the SUBWOOFER PREOUT connector to the line level input connector of the powered subwoofer.

Caution

•These speaker terminals carry HAZARDOUS LIVE voltage. To prevent the risk of electric shock when connecting or disconnecting the speaker cables, disconnect the power cord before touching any uninsulated parts.

•Do not connect any speakers other than those designated for this system.

•After connecting the plugs, pull lightly on the cables to make sure that the ends of the cables are securely connected to the terminals. Poor connections can create noise and interruptions on the sound.

•If the cable’s wires happen to be pushed out of the terminals, allowing the wires to come into contact with each other, it places an excessive additional load on the amp. This may cause the amp to stop functioning, and may even damage the amp.

02

English Deutsch Français Italiano Nederlands Español

25

En