Pioneer SX-LX03 manual 06Connecting an iPod Chapter, Connecting your iPod to this unit

06Connecting an iPod

Chapter 6

Connecting an iPod

Connecting your iPod to this unit

This unit has a dedicated iPod terminal that will allow you to control playback of audio content from your iPod using the controls of this unit.1

iPod DIRECT

PHONES MCACC

iPod DIRECT

USB cable (for iPod connection)

iPod

MENU





1Set this unit to the standby mode, and then use the USB cable (for iPod connection)2 to connect your iPod to the iPod DIRECT terminal on the front panel of this unit.

For the cable connection, refer to also the operating instructions for iPod.

2Switch the unit on and press the iPod input source button on the remote control to switch the unit to the iPod.

The front panel display shows Loading while the unit verifies the connection and retrieves data from the iPod.

TOP MENU

3 Press to display iPod Top menu.

When the display shows Top Menu you’re ready to play music from the iPod.3

•If after pressing iPod the display shows No Device, try switching off the unit and reconnecting the iPod to the unit.

iPod playback

This unit’s front panel display can be used to navigate tracks on your iPod.4

Note

1• This unit is compatible with the audio of iPod nano, iPod fifth generation, iPod classic, iPod touch (not supported iPod shuffle and iPhone). However, that some of the functions may be restricted for some models. Note, however, compatibility may vary depending on the software version of your iPod. Please be sure to use the latest available software version.

•iPod is licensed for reproduction of non-copyrighted materials or materials the user is legally permitted to reproduce.

•Features such as the equalizer cannot be controlled using this unit, and we recommend switching the equalizer off before connecting.

•Pioneer cannot under any circumstances accept responsibility for any direct or indirect loss arising from any inconvenience or loss of recorded material resulting from the iPod failure.

2The USB cable (for iPod connection) is not included with this unit.

3The controls of your iPod will be inoperable when connected to this unit. Features such as the equalizer cannot be controlled using this unit, and we recommend switching the equalizer off before connecting.

4• Note that non-roman characters in the title are displayed as #.

•This feature is not available for photos or video clips on your iPod.

36

En