Pioneer SX-LX03 manual Player connections, About HDMI, About the HDMI high speed transmission

Player connections 02

About HDMI

This player incorporates High-Definition Multimedia Interface (HDMI™) technology.

The player supports Deep Color. The conventional players can transmit a video signal with 8 bit color depth in the YCbCr 4:4:4 or RGB formats, the players supporting Deep Color can transmit a video signal with a color bit depth of greater than 8 bits per color component. Subtle color gradations can be reproduced when connected to a TV that supports Deep Color.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

Audio signals that can be transferred with the player’s HDMI OUT terminal

•Dolby TrueHD

•Dolby Digital Plus

•Dolby Digital

•DTS-HD Master Audio

•DTS-HD High Resolution Audio

•DTS Digital Surround

•MPEG-2 AAC

•Linear PCM

Linear PCM audio signals meeting the following conditions can be output:

–Sampling frequency: 32 kHz to 192 kHz

–Number of channels: Up to 8 (up to 6 for a 192 kHz sampling frequency)

When outputting the bitstream of Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS- HD Master Audio, DTS-HD High Resolution Audio, DTS Digital Surround, MPEG or MPEG- 2 AAC, these audio signals output in linear PCM from the HDMI terminal to this receiver.

For details, see About the audio output settings on page 121.

About the HDMI high speed transmission

This player outputs 1080/50p, 1080/60p and Deep Color video signals. If your TV supports 1080/50p, 1080/60p or Deep Color signals, use a High Speed HDMI™ cable or the supplied HDMI cable in order to take advantage of the maximum performance the player and TV can offer. Also set HDMI High-Speed Transmission to On (page 110).

High Speed HDMI™ cables are tested to carry signals up to 1080p. 1080/50i, 1080/50p, 720/ 50p, 1080/24p, 1080/60i, 1080/60p and 720/60p video signals that are capable of Deep Color can also be carried.

Note

•Set HDMI High-Speed Transmission to Off when using an HDMI cable other than a High Speed HDMI™ cable (a Standard HDMI™ cable).

•The following restrictions apply when HDMI High-Speed Transmission is set to Off:

–Deep Color signals are not output.

–If output video resolution is set to Auto, the signals are output with a resolution of 1080/50i or 1080/60i when TV’s preferred resolution is 1080/50p or 1080/60p.

–When the output video resolution is set to 576i/480i or 576p/480p, Dolby TrueHD and DTS-HD Master Audio signals are not output as such. They are either output as Dolby Digital or DTS Digital Surround signals or converted into linear PCM. Also, 96 kHz and 192 kHz multi-channel linear PCM audio signals cannot be output. They are output as 2-channel signals (page 121).

•When an HDMI cable with a built-in equalizer is connected, it may not operate properly.

English Deutsch Français Italiano Nederlands Español

77

En