Pioneer SX-LX03 manual Switching the HDMI audio setting, Setting the Auto Delay, Other connections

Other connections 09

Switching the HDMI audio setting

Specifies the routing of the HDMI audio signal out of this system (amp) or through to a TV or Flat Screen TV. You cannot use a number of sound functions of this system when HDMI audio is set to TV.

	SETUP
1	TOOLS Press SETUP.
	ENTER
2	Select ‘HDMI Setup’ then press
ENTER.
	ENTER
3	Select ‘HDMI Audio’, then press
ENTER.
	ENTER
4	Adjust the setting then press

ENTER to confirm.

•AMP – Output an HDMI audio signal from this system.

•TV – Output an HDMI audio signal from a TV or Flat Screen TV.1

Setting the Auto Delay

This feature automatically corrects the audio- to-video delay between components connected with an HDMI cable. The audio delay time is set depending on the operational status of the display connected with an HDMI cable. The audio delay time is automatically adjusted according to the video delay time.

	SETUP
1	TOOLS Press SETUP.
	ENTER
2	Select ‘HDMI Setup’ then press
ENTER.
	ENTER
3	Select ‘Auto Delay’, then press
ENTER.
	ENTER
4	Select ‘A.Delay On’ or ‘A.Delay

Off’ then press ENTER to confirm.

Tip

•This feature is only available when the connected display supports the automatic audio/video synchronizing capability (‘lip- sync’) for HDMI or HDMI Control. If you find the automatically set delay time unsuitable, set A.Delay to Off and adjust the sound delay settings manually (page 35).

English Deutsch Français Italiano Nederlands Español

Note

1This makes it possible to use the TV’s built-in speakers to listen to the audio input from an HDMI 1/2 component. In this event, no sound will be heard from this unit’s speakers (or headphones). All other audio sources (including TUNER) are output from this unit normally.

51

En