Pioneer SX-LX03 02Speaker Setup Guide SX-LX08, Connect the speakers, Home theater sound setup

02Speaker Setup Guide (SX-LX08)

Safety precautions when setting up

When assembling the speakers, lay them down flat on their side to avoid accidents or injury. Make sure to use a stable surface when assembling, setting up, and placing the speakers.

Home theater sound setup

This is a standard multichannel surround sound speaker setup for optimal 5.1 channel home theater sound. The front left and right speakers should be about 1.8 m to 2.7 m apart.

Front	Front
left	right

	Center	Powered
		Subwoofer
Surround		Surround
left	Listening position	right

Connect the speakers

Attach one end of the speaker cable provided with the speaker system (or a commercial alternative) to the speaker cable adaptor furnished as an accessory with this unit.

•When connecting the speakers, consult the operating instructions provided with the speaker system.

•This system is not provided with speaker cables. Please purchase speaker cables separately.

Twist exposed wire strands together.

10 mm

While holding down the two buttons on the adaptor, insert the wire ends of speaker cable into the adaptor.

•White, Red, Blue, Grey and Green speaker cable adaptors are provided as accessories. Use these to attach your own cables for the front left/right speakers, surround left/right speakers and center speaker.

•The speaker cable adaptors are color- coded to their matching speakers. Insert the proper cable into its adapter of designated color. Confirm the polarity (+/–) indicated on the adaptor and cable, and match the polarities properly.

Speaker cable

Connect the speaker cable adaptors to the color-coded speaker terminals on the rear of the receiver. Make sure to insert completely.

•The small lug at the wire-end of the speaker plug should face up or down depending on whether it’s being plugged into one of the upper or lower speaker terminals. Please make sure to connect correctly.

Upper terminal Lower terminal

Connect the other end to speaker terminals on the speaker system. Make sure to insert completely.

•Consult the operating instructions provided with the speaker and confirm the connection procedures.

24

En