NOTE: This heater features a
Setting the Variable
Temperature
The variable temperature can be used to maintain your desired temperature.
NOTE: The variable temperature only operates when the heater is being used in the Auto mode.
Press the MODE | M | button until the |
| ODE |
|
heater is set to AUTO mode.
The LCD screen will display the default temperature of 25°C and will flash. When the temperature is flashing, you may set the desired temperature using the VARIABLE TEMPERATURE
The temperature can be set between 15° C and 35°C.
When the air temperature reaches
When the air temperature drops below the set temperature the unit will begin heating again.
Setting the Oscillation
The oscillation function works in all operating modes.
Press the SWING | ING | button once to |
| SW |
|
activate. The heater will begin to oscillate from side to side.
Press the SWING | ING | button again to |
| SW |
|
stop the heater from oscillating.
Setting the Auto-Off Timer
The timer function works in all operating modes, and switches the unit off after a preset number of hours.
Press the TIMER | TI MER | button to activate |
the timer settings. A timer symbol
will appear on the LCD screen | ||
displaying 1 hour. | button to cycle | |
Press the TIMER | TI MER |
DIAL on top of the unit.
TEM P E
through the one hour increments, up
To adjust the set temperature rotate
the VARIABLE TEMPERATURE | TEM P E | DIAL |
clockwise to increase the desired temperature or
to 8 hours. The unit will then switch itself to standby mode after the selected number of hours has passed.
9
KCE440_IB_FA.indd 9 | 12/10/09 2:26 PM |