Odor Fade Warning, Fuelgasodor | Universal SPC-30R/30R, SPC-15R/15R

Models

SPC-15R/15R SPC-30R/30R

ODOR FADE WARNING

WARNING

Asphyxiation Hazard

•Do not use this heater for heating human living quarters.

•Do not use in unventilated areas.

•The flow of combustion and ventilation air must not be obstructed.

•Proper ventilation air must be provided to support the combustion air requirements of the heater being used.

•Refer to the specification section of the heater’s manual,

heater dataplate, or contact the Scheu Products Company to determine combustion air ventilation requirements of the heater.

•Lack of proper ventilation air will lead to improper combustion.

•Improper combustion can lead to carbon monoxide poisoning leading to serious injury or death. Symptom of carbon monoxide poisoning can include headaches dizziness and difficulty in breathing.

FUELGASODOR

LP gas and natural gas have man-made odorants added specifically for detection of fuel gas leaks.

If a gas leak occurs you should be able to smell the fuel gas. Since Propane (LP) is heavier than air you should smell for the gas odor low to the floor. ANY GAS ODOR IS YOUR SIGNAL TO GO INTO IMMEDIATE ACTION!

•Do not take any action that could ignite the fuel gas. Do not operate any electrical switches. Do not pull any power supply or extension cords. Do not light matches or any other source of flame. Do not use your telephone.

•Get everyone out of the building and away from the area immediately.

•Close all propane (LP) gas tank or cylinder fuel supply valves, or the main fuel supply valve located at the meter if you use natural gas.

•Propane (LP) gas is heavier than air and may settle in low

areas. When you have reason to suspect a propane leak, keep out of all low areas.

•Use your neighbor’s phone and call your fuel gas supplier and your fire department. Do not re-enter the building or area.

•Stay out of the building and away from the area until declared safe by the firefighters and your fuel gas supplier.

•FINALLY, let the fuel gas service person and the firefighters check for escaped gas. Have them air out the building and area before you return. Properly trained service people must repair any leaks, check for further leakages, and then relight the appliance for you.

ODORFADING-NOODORDETECTED

•Some people cannot smell well. Some people cannot smell the odor of the man-made chemical added to propane (LP) or natural gas. You must determine if you can smell the odorant in these fuel gases.

•Learn to recognize the odor of propane (LP) gas and natural gas. Local propane (LP) gas dealers will be more than happy to give you a scratch and sniff pamphlet. Use it to become familiar with the fuel gas odor.

•Smoking can decrease your ability to smell. Being around an odor for a period of time can affect your sensitivity to that particular odor. Odors present in animal confinement buildings can mask fuel gas odor.

ATTENTION-CRITICALPOINTSTOREMEMBER!

•Propane (LP) gas has a distinctive odor. Learn to recognize these odors. (Reference Fuel Gas Odor and Odor Fading sections above.

•Even If you are not property trained in the service and repair of the heater, ALWAYS be consciously aware of the odors of propane (LP) gas and natural gas.

•If you have not been properly trained in repair and service of propane (LP) gas then do not attempt to light heater, perform service or repairs, or make any adjustments to the heater on the propane (LP) gas fuel system.

•The odorant in propane (LP) gas and natural gas is colorless and the intensity of its odor can fade under some circumstances.

•If there is an underground leak, the movement of gas through the soil can filter the odorant.

•Propane (LP) gas odor may differ in intensity at different levels. Since Propane (LP) gas is heavier than air, there may be more odor at lower levels.

•Always be sensitive to the slightest gas odor. If you continue to detect any gas odor, no matter how small, treat it as a serious leak. Immediately go into action as discussed previously.

•A periodic sniff test around the heater or at the heater’s joints; i.e. hose, connections, etc., is a good safety practice under any conditions. If you smell even a small amount of gas, CONTACT YOUR FUEL GAS SUPPLIER IMMEDIATELY. DO NOT WAIT!

Page -4-

SPC-15R/15R, SPC-30R/30R specifications

The Universal SPC-30R/30R and SPC-15R/15R are versatile, high-performance devices widely used in various industries for monitoring and controlling processes. These machines are integral to modern manufacturing and production environments, offering advanced features that enhance productivity, precision, and efficiency.

One of the standout features of the Universal SPC models is their robust data collection and analysis capabilities. They come equipped with state-of-the-art sensors that provide real-time monitoring of critical parameters, ensuring that any deviations from desired specifications are detected immediately. This real-time data access not only facilitates immediate corrective actions but also aids in maintaining consistent product quality.

The SPC-30R/30R models boast enhanced connectivity options, allowing seamless integration with existing systems. This connectivity ensures that data can be shared effortlessly across different platforms, enabling comprehensive process optimization. Furthermore, the use of advanced wireless technology in these models means that operators can access performance data remotely, enhancing overall operational flexibility.

Another key characteristic of the Universal SPC series is their user-friendly interface. Designed with an intuitive layout, the controls and display screens are easily navigable, making it simple for operators to monitor processes and manage settings. This ease of use minimizes training time and helps reduce the likelihood of operator error.

In terms of technology, the SPC-30R/30R and SPC-15R/15R are equipped with sophisticated algorithms that analyze the collected data and provide actionable insights. This predictive analytics capability not only improves decision-making processes but also allows for proactive maintenance schedules, thus reducing downtime and extending the lifespan of equipment.

The durability of these models is yet another advantage. Built with high-quality materials and designed to operate in demanding conditions, the Universal SPC devices are less prone to failure, ensuring reliable performance even in harsh environments. Their compact form factor also allows for easy installation in various settings, maximizing space utilization.

Moreover, the versatility of the Universal SPC series extends beyond single-function applications. They can be employed in diverse fields such as automotive, aerospace, pharmaceuticals, and consumer goods manufacturing. This adaptability makes them a valuable investment for any organization looking to enhance its operational capabilities.

In summary, the Universal SPC-30R/30R and SPC-15R/15R are exemplary devices that combine advanced features, intuitive technology, and reliable performance. Their robust capabilities make them essential tools for organizations aiming to optimize productivity, ensure quality, and maintain efficiency in today's competitive industrial landscape.