Univex 318258-000 Operational Conditions, Powered Anode Operation, Water Heater Sounds, Stacking

Page 13

Operational Conditions

Powered Anode Operation

To shelter the glass-lined water tank from corrosion through electrolysis, this water heater is equipped with a non-sacrificial powered anode which should not need to be replaced under normal operating conditions.

If the powered anode malfunctions it should be replaced by a qualified technician.

IMPORTANT: If a faulty powered anode is not repaired or has been removed permanently, then all warranties are void.

Water Heater Sounds

During the normal operation of the water heater, sounds or noises may be heard. These noises are common and may result from the following:

1.Normal expansion and contraction of metal parts during periods of heat-up and cool-down.

2.Sediment buildup on or around the elements could create varying amounts of noise and may cause premature tank failure. Drain and flush the tank as directed under the “Draining and Flushing” section.

3.The heat pump compressor or fan running.

Stacking

Stacking occurs when a series of short draws of hot water (3 gallons or less) are taken from the water heater tank. This causes increased cycling of the heat pump and/

or heater elements and can result in increased water temperatures at the hot water outlet. An anti-scald device is recommended in the hot water supply line to reduce the risk of scald injury.

13

Image 13
Contents Installation Instructions Use & Care Guide Your safety and the safety of others are very important Water Heater SafetyConsumer Information Installing Your Water HeaterConsumer Responsibilities Basic Operation FundamentalsSite location Location RequirementsWater System Piping Piping InstallationClosed System/Thermal Expansion Condensate Drain Line InstallationTemperature & Pressure Relief Valve Temperature and Pressure Relief ValveElectrical Requirements Press the power button to turn the water heater on Connecting the Condensate Pump Overflow Shut Off SwitchInsulation Blankets Post Installation Review Installation ChecklistWater Heater Location Water System PipingWater Temperature Regulation Before UsingOperating Your Water Heater Water Temperature Adjustment Adjusting the User Interface Module/Operational ModesOperating Mode Descriptions Other ControlsOperational Conditions Powered Anode OperationWater Heater Sounds StackingHeating Element Replacement Maintenance of Your Water HeaterDraining and Flushing Routine Preventive Maintenance Cleaning the Heat PumpAir Filter Cleaning/Replacement Replace the foam blocks and access coversDisplay Shows Indicates Diagnostic CodesProblem Possible Causes Troubleshooting ChartRepair Part Illustration Page Copyright 2010 State Industries, Inc. All rights reserved

318258-000, EPX-80DHPT specifications

The Univex 318258-000, also known as the EPX-80DHPT, is a highly advanced pizza and baking oven carefully designed to meet the rigorous demands of commercial kitchens. Its innovative features, robust technologies, and user-friendly characteristics make it an essential piece of equipment for pizzerias, bakeries, and food service establishments.

One of the standout features of the Univex EPX-80DHPT is its dual heating system. This system combines both convection and radiant heat, ensuring even cooking and optimal baking results for a variety of dishes. The convection aspect promotes efficient airflow, allowing for uniform heat distribution, while the radiant heat emphasizes crispiness and browning, making it perfect for achieving that perfect pizza crust.

The oven's chamber is spacious, providing ample room to cook multiple pizzas simultaneously, which is a significant advantage during peak service hours. It has a baking capacity of up to 8 pizzas at a time, depending on their size, catering to busy restaurants and catering events effectively. Furthermore, the high-temperature capabilities of the EPX-80DHPT make it suitable for a wide range of baking applications, including artisanal bread, cookies, and pastries.

The Univex EPX-80DHPT is designed with user convenience in mind. Its digital control panel is intuitive and easy to navigate, allowing chefs to set precise cooking temperatures and times. The built-in timer and temperature control help ensure consistent results, minimizing the risk of overcooking or undercooking. With the ability to set temperatures up to 650 degrees Fahrenheit, this oven is versatile enough to accommodate various cooking styles and recipes.

Durability is another hallmark of the Univex EPX-80DHPT. Constructed with high-quality stainless steel, this oven is built to withstand the rigors of daily use in busy kitchens. Its solid construction not only ensures longevity but also facilitates easy cleaning and maintenance.

In summary, the Univex 318258-000, EPX-80DHPT, combines advanced technology, user-friendly features, and robust construction to deliver a top-tier baking solution for any commercial kitchen. With its impressive cooking capabilities, intuitive controls, and durable design, this oven stands out as an essential asset for those who prioritize quality and efficiency in their culinary offerings.