Jabra 100-91430000-02 quick start Status Indicators, To answer and end calls with only the headset

To answer and end calls with only the headset:

Some phones enable you to answer or end a call by pressing and releasing without having to touch the phone. For all Nextel phone models (except the i1000), the phone’s Automatic Answer feature needs to be activated for this headset feature to work.

For the BlackBerry 6510, FreeSpeak's Anwer/End feature has to be turned on.

To turn on FreeSpeak's Answer/End feature:

1)Ensure that the AC power adapter is not connected.

2)Put the headset in the multi-adapter.

3)Use the stylus to press the stylus switch for about 12 seconds.

4)You will then see a number of blinks (long flashes) on the multi-adapter indicator light which tell you whether this feature is enabled or disabled according to the following table:

Number of Blinks	Answer/End Feature	Comments
4	Enabled	--
5	Disabled	Default Setting

5) Repeat steps 1-4 to switch between enabled and disabled settings.

If you are enabling Answer/End feature for the first time, you should test answering and ending calls to ensure that your phone supports this feature.

For more information, see “Enhanced Features” at www.jabra.com/fscs.

Calls can be ended by the headset only by waiting for the line to disconnect.

STATUS INDICATORS

What you see	What you hear	Status
Flashes every second	When Active Mode
		Active Mode
	starts: quick series	• Call in progress
	of TWO tones – low	• Up to 4 hours of talk time
	to high pitch
	When Standby	Standby Mode
Flashes every 3
	Mode starts: quick
seconds		• Waiting for call
	series of TWO
		• Up to 100 hours of standby time with
	tones – high to low
		mheadset in multi-adapter
	pitch