Jabra 100-91030000-02, 100-91430000-02 Tips & Solutions, To prolong battery life, Multi-adapter

TIPS & SOLUTIONS

To prolong battery life:

•After you’ve ended a call using your phone’s keypad, always remember to place the

headset in Standby mode by pressing and releasing when not in use.

•Dock the headset firmly in its multi-adapter when not in use.

If you press and release and the headset stays in Standby mode:

If FreeSpeak becomes unpaired, it will not respond to the occur when you first receive the product or when you hold the the product.

To “pair” the headset with the multi-adapter:

button. In rare cases, this may button too long while using

1.Ensure headset is off.

2.Press until you see a solid blue light on the headset, then release.

3.Use the stylus to press down on the

stylus switch until you see a solid blue
			Multi-adapter
light on the multi-adapter, then
release.
Important: Once pairing is complete,
lights on both the headset and multi-	Stylus
adapter will begin flashing (Standby
	Switch
mode).
		Stylus

If you hear an echo of your voice – You may need to adjust

microphone levels. To reduce the echo:

1.Lower the volume of your phone and headset.

2.If echo persists, put FreeSpeak in Active mode.

Flashes or Microphone Level Beeps

1High (default)

2Medium

3Low

3.Use the stylus to press down on the stylus switch (as shown above) until you see a solid c blue light on the multi-adapter. Continue to press down until you see/hear 1, 2, or 3

z flashes/beeps, then release. The last number of flashes/beeps corresponds to the final c setting.

4.Repeat step 3 to cycle between different microphone levels.