Walker W44CMPBL manual

Page 11

Attach panels (4,8) to the other end of the stand assembly using cam bolts and dowels as guides. Secure panels (4,8) by inserting large cam locks (C) into panels (4,8) and tightening with a screwdriver.

Slide back panel (9) into the stand assembly along the grooves at the back of the assembly.

Image 11

Contents Revised 10/2010 Item # W44CMP Assembly InstructionsGeneral Assembly Guidelines Parts List Hardware List Screw short cam bolts E into stand top Screw short cam bolts E into stand base Page Insert long dowels B into panels 6,7,8 Page Insert long cam bolts F into middle panel 2. Insert large cam locks C into panels 7,8 and tighten with a screwdriver Page Insert large cam locks C into panels 4,8. Attach stand top 1 to the stand assembly using cam bolts and dowels as guides. Tighten large cam locks C with a screwdriver Page