Walker W44CMPBL manual

Page 7

Insert short dowels (A) into panels (4,5,6,7) on appropriate sides.

Attach panels (5,6,7,8) to stand base (3) using cam bolts and dowels as guides. Note that panels (8) are not attached to panels (6,7), but that all panels should align when attached to stand base (3). Secure panels (6,7,8) to stand base (3) by inserting large cam locks (C) into panels (6,7,8) and tightening with a screwdriver.

Image 7

Contents Revised 10/2010 Item # W44CMP Assembly InstructionsGeneral Assembly Guidelines Parts List Hardware List Screw short cam bolts E into stand top Screw short cam bolts E into stand base Page Insert long dowels B into panels 6,7,8 Page Insert long cam bolts F into middle panel 2. Insert large cam locks C into panels 7,8 and tighten with a screwdriver Page Insert large cam locks C into panels 4,8. Attach stand top 1 to the stand assembly using cam bolts and dowels as guides. Tighten large cam locks C with a screwdriver Page