Westinghouse W-048, 60612 Mounting And Wiring Instructions, Fixture Assembly Instructions

Page 4
MOUNTING AND WIRING INSTRUCTIONS

MOUNTING AND WIRING INSTRUCTIONS

NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fixtures meet all UL specifications.

1.Turn off power at circuit box to avoid possible electric shock.

2.Remove cap nuts (A) from back plate (B) and remove universal mounting plate or cross bar (C), leaving mounting screws (D) in place (see fig. 1).

3.Secure universal mounting plate or cross bar (C) to outlet box (E) with outlet box screws (F) (not included).

4.Identify color coding of fixture wires (see fig. 2 on page 11).

5.To connect wires, take black fixture wire (group A from fig. 2) and place evenly against black outlet box wire. Do not twist wires.

6.Fit wire connector (G from fig. 1) over wires and twist until there is a firm connection. If wire connector (G) easily comes off, reattach and check again for a firm connection.

7.Repeat steps 5 and 6 with the white (group B from fig. 2) fixture and outlet box wires.

8.Partially thread green grounding screw (H) into side hole (I) on universal mounting plate or cross bar (C) (see fig.1).

9.Wrap ground wire from fixture around green grounding screw (H) leaving enough excess wire to then connect ground wire and outlet box wire with wire connector (G), if applicable.

10.Tighten green grounding screw (H). Do not over tighten.

11.Tuck wires inside outlet box (E) (see fig. 1).

FIXTURE ASSEMBLY INSTRUCTIONS

Warning: This fixture is for indoor use only.

1.Position back plate (B) over mounting screws (D) by aligning back plate openings (J) with mounting screws (D).

NOTE: Position back plate with power switch (K) pointed downward.

2.Secure with cap nuts (A).

3.Install glass shade (L) and plate (if applicable) into holder(s). Secure with thumb screws or ring(s) (O), whichever is applicable.

4.Install lamp(s). Do not exceed recommended wattage.

5.Turn power back on at circuit box.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Indoor Lighting Fixture Installation Instructions WARRANTY INFORMATION ASSEMBLY INSTRUCTIONS FOR INDOOR LIGHT FIXTUREPLATE SWITCH K if applicableif applicable MOUNTING AND WIRING INSTRUCTIONS FIXTURE ASSEMBLY INSTRUCTIONSGARANTIE LIMITÉE DE CINQ ANS Page INSTRUCTIONS D’ASSEMBLAGE DE LAPPAREIL DÉCLAIRAGE INSTRUCTIONS DE MONTAGE ET DE RACCORDEMENTGARANTÍA LIMITADA DE CINCO AÑOS FIGURA INSTRUCCIONES DE MONTAJE Y CABLEADO INSTRUCCIONES DE MONTAJE DEL ARTEFACTOADVERTENCIA MISE EN GARDEFIGURA CLEANING AND CARE COMMANDE DE PIÈCESORDERING PARTS NETTOYAGE ET ENTRETIEN
Related manuals
Manual 12 pages 32.03 Kb

60612, W-048 specifications

The Westinghouse W-048 is a remarkable technological advancement in the realm of nuclear power, specifically designed for the Generation III+ reactor systems. This innovative reactor exemplifies efficiency, safety, and sustainability, catering to the growing demand for low-carbon energy sources amidst environmental concerns.

One of the main features of the Westinghouse W-048 is its enhanced safety systems. The reactor incorporates passive safety features that function without active intervention or external power. These systems utilize natural forces such as gravity and convection to mitigate potential accidents, ensuring the reactor remains secure even in emergency situations. The design significantly improves the safety margins compared to older reactor models, reflecting a comprehensive approach to safeguarding both personnel and the environment.

The W-048 operates using the pressurized water reactor (PWR) design, renowned for its reliability and stability. It employs enriched uranium fuel, which provides a high energy output while maintaining manageable levels of radioactive waste. The reactor is designed to achieve a thermal output of approximately 1,500 megawatts, with a goal of optimizing fuel utilization to extend the operational lifespan between refueling outages.

In terms of efficiency, the Westinghouse W-048 boasts advanced steam generation technology, utilizing improved steam turbine systems that enhance overall plant performance. The integration of digital instrumentation and controls allows for improved monitoring and optimization of various processes, providing operators with real-time data to make informed decisions.

The reactor's design also places a strong emphasis on environmental sustainability. The W-048 is positioned to contribute to a significant reduction in greenhouse gas emissions, playing a pivotal role in global efforts to transition to cleaner energy solutions. The system's capability to incorporate mixed oxide (MOX) fuel further underscores its commitment to sustainability, as it allows for the reuse of plutonium and the recycling of nuclear fuel.

Overall, the Westinghouse W-048 stands as a beacon of innovation within the nuclear energy sector. Its combination of advanced safety features, efficient energy production capabilities, and commitment to environmental sustainability positions it as an important player in the future of clean energy. As nations seek reliable and low-emission energy sources, the W-048 offers a promising solution that aligns with global energy needs while prioritizing safety and environmental consciousness.
Top Page Image Contents