Mounting and Wiring Instructions

12 pg_W-224_EFS 10/30/05 10:49 AM Page 4

NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fixtures meet all UL specifications.

1.Turn off power at circuit box to avoid possible electric shock.

2.Secure mounting bar (A) to outlet box (B) with outlet box screws (C) (not included) (see fig. 1).

3.Thread hex nut (D) onto mounting nipple (E) approximately 1/4 inch and insert lockwasher (F), then thread mounting nipple (E) onto mounting bar (A) and secure with hex nut (D).

4.Spread fixture arms (S).

5.Slide plate (T) over nipple (U) and secure with finial (V).

6.Thread fixture loop (H) onto nipple (I) of fixture base.

7.Open one link on bottom end of chain (G). Attach to fixture loop (H). Securely close link on chain (G).

8.Thread screw collar ring (J) onto screw collar (K), then place canopy (L) over top of screw collar (K).

9.Lace wires up through every other link on chain (G) then through screw collar (K) and mounting nipple (E).

10.Open one link on top end of chain (G). Attach to loop on screw collar (K). Securely close link on chain (G).

11.Thread canopy (L) over top of wires and over top of screw collar (K).

12.Identify color coding of fixture wires (see fig. 2).

13.To connect wires, take black fixture wire (group A from fig. 2) and place evenly against black outlet box wire. Do not twist wires.

14.Fit wire connector (M from fig. 1) over wires and twist until there is a firm connection. If wire connector (M) easily comes off, reattach and check again for a firm connection.

15.Repeat steps 11 and 12 with the white (group B from fig. 2) fixture and outlet box wires.

16.Partially thread green grounding screw (N) into side hole (O) on mounting bar (A) (see fig. 1).

17.Wrap ground wire from fixture around green grounding screw (N), leaving enough excess wire to then connect ground wire and outlet box wire with wire connector (M), if applicable.

18.Tighten green grounding screw (N). Do not over tighten.

19.Remove screw collar ring (J) from screw collar (K) and secure screw collar (K) to mounting nipple (E).

20.Tuckwires inside outlet box (B).

21.Raise canopy (L) to ceiling and secure screw collar ring (J) to screw collar (K).

FIXTURE ASSEMBLY INSTRUCTIONS

Warning: This fixture is for indoor use only.

1.Place glass shade(s) (P) over socket(s) (Q) and secure with retaining ring(s) (R).

2.Install lamp(s). Do not exceed recommended wattage.

3.Turn power back on at circuit box.

W-224 specifications

The Westinghouse W-224 is a pioneering reactor design that represents a significant milestone in the evolution of nuclear power technology. Developed by the Westinghouse Electric Corporation, this reactor type stands out due to its unique features, advanced technologies, and robust characteristics that contribute to its effectiveness and reliability in generating energy.

One of the main features of the W-224 reactor is its pressurized water reactor (PWR) design. This design allows for the effective transfer of heat generated from nuclear fission to a secondary loop, where steam is produced to drive turbines for electricity generation. The PWR configuration is known for its safety and efficiency, providing a stable operation under various conditions.

The W-224 incorporates advanced fuel technology, utilizing low enriched uranium fuel that enhances its efficiency and sustainability. The reactor’s core is designed to optimize the neutron economy, enabling a longer fuel cycle before refueling is required. This not only improves its operational efficiency but also reduces the overall operational costs.

Safety features are a paramount aspect of the W-224, designed to exceed stringent regulatory requirements. The reactor integrates multiple safety systems, including redundant cooling mechanisms and emergency core cooling systems, ensuring that the reactor can maintain a safe state in the event of a malfunction. The containment structure is robust, providing additional layers of security against potential incidents.

The W-224 is equipped with advanced control systems that facilitate real-time monitoring and management of reactor operations. These systems harness digital technology and sophisticated algorithms to optimize performance and maintain safety standards, allowing operators to make informed decisions promptly.

In terms of its characteristics, the Westinghouse W-224 is designed for flexibility, with the capability to operate in various grid conditions. It can easily integrate with renewable energy sources, supporting the transition to a sustainable energy future. Additionally, its compact design makes it suitable for deployment in diverse locations, including those with limited space.

The Westinghouse W-224 represents a cutting-edge solution in nuclear energy, combining advanced technologies with a strong focus on safety and efficiency. As the energy landscape evolves, this reactor stands as a testament to innovation in the quest for reliable and sustainable power generation.