X10 Wireless Technology SC1200 Initializing Keychain Remotes, Initializing Door/Window Sensors

Page 7

Installation

Initializing Keychain Remotes

Press and hold the ARM button on the Keychain remote for 3-4 seconds and then release it. This initializes the remote and picks a random code that is used when it is registered with the Console. Note, if the Keychain remote you purchased is different from shown here, refer to the installation instructions that came with it.

Registering the Keychain Remote with the Console

Press either of the Menu up/down buttons (under the lid to the bottom right of the display). The display then shows ENTER PIN (Personal Identification Number) in the top line.

ENTER PIN 12:00 am

The default PIN is 0000, you’ll find out later (page 24) how you can change this, but for now press 0000 on the keypad (under the lid to the bottom right of the display). This clears the top line and shows * for each number entered.

****

12:00 am

This takes you to the first level of the menu at step 1. This is the INSTALLATION level. When you see INSTALL on the display, press OK. The display then looks like this:

1.INSTALL ZONE

Now simply press any button on the Keychain remote. The Console acknowledges that it has been registered by beeping and displaying RMOT 1 SET, RMOT 2 SET, etc., as you install more remotes.

Repeat this for any other Keychain Remotes you want to register.

Press Clear to back out of the menu. You are asked to confirm, 1. YES, 2 NO. Pressing 1 takes you back to the HOME CONTROL screen. Pressing 2 takes you up one level of menu.

12

Installation

Initializing Door/Window Sensors

Remove the screw from the front of the Door/Window Sensor and install 2 AAA alkaline batteries inside. Observe polarity.

Set switch to MAX (left) for doors, or MIN (right) for windows.

Press and hold the button inside the Sensor for 3-4 seconds and then release it. This initializes the Sensor and picks a random code that is

used when it is registered with the Console. Replace cover and place the magnet next to the Sensor (with the arrows aligned).

See pages 14 and 15 if you want to use an additional magnetic contact switch. Note, if the Sensors you purchased are different from shown here, refer to the installation instructions that came with them.

Registering Door/Window Sensors with the Console

Press either of the Menu up/down buttons (under the lid to the right of the display). The display then shows ENTER PIN (Personal Identification Number) in the top line.

ENTER PIN 12:00 am

The default PIN is 0000, you’ll find out later (page 24) how you can change this, but for now press 0000 on the keypad (under the lid to the bottom right of the display). This clears the top line and shows * for each number entered.

****

12:00 am

This takes you to the first level of the menu at step 1. This is the INSTALLATION level. The display looks like this:

1. INSTALL

Press OK and the display looks like this:

1.INSTALL ZONE

13

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Model SC1200 Supervised Security SystemRead This First Contents Locating the Security Console InstallationIntroduction Locating Security System componentsMounting the Console Fitting the backup batteriesSecurity Console Attaching cablesInstall Console setup Overview,Sub-menus First Menu LevelInitializing Door/Window Sensors Install ZoneInitializing Keychain Remotes Registering the Keychain Remote with the ConsoleClear Zone 1. YES 2. no Installing the Door/Window SensorsInstall Zone 13 OUT Removing Door/ Window SensorsRegistering the Motion Detector with the Console Initializing Motion DetectorsRemoving Motion Detectors Hard-Wired Inputs Installing the Motion DetectorTesting the Motion Detector Setting the phone numbers Setting the ClockSpeak NOW Recording your outgoing phone messageRecord Replay Please WaitClearing the memory Changing your Personal Identification Number PINMemory Clear Setting Delays Setting OptionsEntry Delay Unit Number Setting TimersNEW Timer Timer 12 OFFReplace Timr Reviewing/Canceling TimersReplacing Timers Clear TimerDisarming the system Using the systemIf there’s a problem Arming the systemControlling Lights and Appliances When there’s an alarmIf the system is tampered with Optional Lamp Modules Operation from an Outside Telephone Door/Window Sensors and Motion Detectors Battery InformationGeneral Keychain RemotesProblem Solution TroubleshootingTest Intercom Systems Special NoteLamp Module LM15A Expanding Your SystemXCam2 Camera Ninja Base VCR Commander X10 Wireless CamerasPage SC1200 -12/10 Supervised Security System

SC1200 specifications

The X10 Wireless Technology SC1200 is an innovative wireless home security solution that combines advanced features with user-friendly operation. Designed for homeowners seeking to enhance their security while maintaining convenience, the SC1200 reflects X10's commitment to providing reliable and cutting-edge technology.

One of the key features of the SC1200 is its wireless functionality. Operating on a 310 MHz frequency, the system effectively eliminates the need for complex wiring, making installation straightforward and hassle-free. This wireless capability also allows the user to place sensors and cameras in locations that may be difficult to reach with traditional wired systems, providing more flexibility in designing a tailored security setup.

The SC1200 is equipped with a powerful motion detection system, which uses passive infrared sensors to detect movement within its field of view. This feature ensures that any motion is promptly captured, allowing for immediate alerts sent to the user's smartphone or dedicated receiver. Moreover, the system supports multiple zones, enabling users to customize which areas are monitored and the sensitivity of each sensor, thereby minimizing false alarms.

Another significant characteristic of the SC1200 is its compatibility with X10's extensive range of wireless devices and accessories. Users can enhance their systems with additional motion sensors, door/window sensors, remote controls, and even smart home devices, creating a comprehensive security network tailored to their unique needs. The modularity of the system means that homeowners can easily scale their security measures as desired.

The SC1200 also offers a backup power feature. In case of power failure, the system can continue to operate, ensuring uninterrupted service. This reliability is crucial for any security system, as it guarantees continuous surveillance and peace of mind, even during unforeseen circumstances.

User-friendliness is a priority for X10, and the SC1200 reflects this philosophy with its intuitive interface. The setup process is simplified with clear instructions, making it accessible for users of all technical backgrounds. Additionally, remote access capabilities allow homeowners to monitor their property in real time from anywhere using their smartphones or tablets.

In summary, the X10 Wireless Technology SC1200 presents an effective and versatile solution for home security. With its wireless installation, sophisticated motion detection, compatibility with various devices, reliable backup power, and user-friendly interface, the SC1200 is well-equipped to meet the security demands of modern homeowners, providing both ease of use and peace of mind.
Top Page Image Contents