Troubleshooting guide

UL-ES-Parkway-WH10

If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults, please check this Trouble Shooting Chart. If a problem cannot be remedied, please consult with your authorized electrician and do not attempt any electrical repairs yourself.

TROUBLE	SUGGESTED REMEDY

1. If fan does not start:	1. Check main and branch circuit fuses or circuit breakers.
	2.	Check wire connections as performed in step #15 or #16 of installation.
		CAUTION: Make sure main power is turned off.
	3.	Make sure forward/reverse switch is firmly in up or down position.
		Fan will not operate when switch is in the middle.
	4.	If the fan still will not start, contact a qualified electrician.
		Do not attempt to troubleshoot internal electrical connections yourself.
2. If fan sounds noisy:	1. Check to make sure all screws in motor housing are snug (not over tightened).
	2.	Check to make sure the screws which attach the fan blade holder to the motor are tight.
	3.	Some fan motors are sensitive to signals from Solid State variable speed controls.
		DO NOT USE a Solid State variable speed control.
	4.	Allow “break-in” period of 24 hours. Most noises associated with a new fan will disappear
		after this period.
3. If fan wobbles:	All blades are weighed and grouped by weight. Natural woods vary in density which could cause
	the fan to wobble even though all blades are weight-matched. The following procedures should
	eliminate most of the wobble. Check for wobble after each step.
	1.	Check that all blades are screwed firmly into blade holders.
	2.	Check that all blade holders are tightened securely to motor.
	3.	Make sure that canopy and mounting bracket are tightened securely to ceiling joist.
	4.	If blade wobble is still noticeable, interchanging two adjacent (side by side) blades can redistribute
	the weight and possibly result in smoother operation.
4. If light does not work:	1. Check to see that the wire connections in the switch housing are connected.
	2.	Check for faulty light bulbs.
	3.	If light kit will still not operate, contact a qualified electrician for assistance.

NOTICE

This‘Energy Policy Act 2005’ compliant fan includes a device that limits the total wattage of its light fixture to 190 watts.

By installing a combination of light bulbs that exceeds 190 watts or if an electrical surge causes the wattage to exceed 190 watts, the light fixture will either dim the lights to 190 watts or will automatically turn off.

To restore the light levels, make sure the total wattage of the light bulbs does not exceed 190 watts and follow the applicable directions below:

For fans with Pull Chains:

Pull the light fixture’s pull chain two times to reset the light fixture. If the power to your fan is controlled by a toggle wall switch, it may be necessary to turn the power off and back on at the wall switch.

For fans with Wall Controls:

Press the light button on the wall control“off” and“on”

once to reset the light fixture.

For fans with Remote Controls:

If you verify the wattage and the lights do not turn on, press the light button on the remote control twice to reset the light fixture.

NOTE: If the procedures above do not reset the lights,

turn off the main power source, located at the breaker panel or box,

and then turn it on again.

UL-ES-Parkway-WH10 specifications

The Westinghouse UL-ES-Parkway-WH10 is an innovative and modern fan that combines aesthetic appeal with cutting-edge technology. Designed for both style and functionality, this model is ideal for enhancing the ambiance of any indoor space, whether in a living room, bedroom, or office.

One of the standout features of the UL-ES-Parkway-WH10 is its sleek, contemporary design. The fan is available in a clean white finish, allowing it to blend seamlessly into various decor styles. Its minimalist look doesn't compromise its performance, making it an attractive addition to any room.

The UL-ES-Parkway-WH10 is equipped with a powerful motor that delivers efficient airflow while maintaining low noise levels. This means users can enjoy a comfortable environment without the distractions typically associated with traditional fans. Additionally, the fan is designed to operate quietly, making it perfect for use in bedrooms or workspaces where concentration is key.

This model also features an energy-efficient LED light kit, providing excellent illumination while reducing energy consumption. The integrated LED lights allow users to brighten their space while benefiting from longer life spans and lower energy costs compared to traditional bulbs. This thoughtful addition enhances the fan's versatility, making it more than just a source of airflow.

Another remarkable characteristic of the UL-ES-Parkway-WH10 is its multiple speed settings. With the ability to choose from various speed options, users can customize their comfort level based on their specific needs and preferences. Whether it's a gentle breeze or a more robust airflow required on warmer days, this fan adapts efficiently to individual preferences.

Installation is straightforward, as the fan comes with clear instructions and all necessary hardware. The UL-ES-Parkway-WH10's compatibility with standard ceiling mount installations makes it accessible for most homeowners looking to upgrade their indoor climate control without the hassle of complicated setups.

In conclusion, the Westinghouse UL-ES-Parkway-WH10 is a modern ceiling fan that excels in both design and performance. With its efficient motor, energy-saving LED lighting, customizable speed settings, and ease of installation, it stands out as an exceptional choice for anyone seeking to enhance their indoor spaces. This fan represents a perfect fusion of style and technology, making it a valuable addition to any home or office setting.