Trouble, Suggested Remedy | Westinghouse 78020, 78024, 78570, 78021

UL-ES-5CC52-WH04(rev 1)

If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation, or wiring. In some cases, these TROUBLESHOOTING GUIDE installation errors may be mistaken for defects. If you experience any faults, please check this Trouble Shooting Chart. If a problem cannot

be remedied, please consult with your authorized electrician and do not attempt any electrical repairs yourself.

TROUBLE

1.If fan does not start:

2.If fan sounds noisy:

3. If fan wobbles:

Touching

Ceiling

Figure 1

Blade Tip Down:

Fan Blade

Blade Brackets

Blade Tip Up:

Fan Blade

4. If light does not work:

SUGGESTED REMEDY

1.Check main and branch circuit fuses or circuit breakers.

2.Check wire connections as performed in step #15 or #16 of installation. CAUTION: Make sure main power is turned off.

3.Make sure forward/reverse switch is firmly in up or down position. Fan will not operate when switch is in the middle.

4.If the fan still will not start, contact a qualified electrician. Do not attempt to troubleshoot internal electrical connections yourself.

1.Check to make sure all screws in motor housing are snug (not over tightened).

2.Check to make sure the screws which attach the fan blade holder to the motor are tight.

3.If using an optional Ceiling Fan Light Kit, check to be sure the screws securing the glassware are finger tight. Check to be sure light bulb is tight in socket and not touching glass shade(s). If vibration persists from glass, remove glass and install a 6mm wide rubber band on glass neck to act as an insulator. Replace glass and tighten screws against rubber band.

4.Some fan motors are sensitive to signals from Solid State variable speed controls. DO NOT USE a Solid State variable speed control.

5.Allow “break-in” period of 24 hours. Most noises associated with a new fan will disappear after this period.

All blades are weighed and grouped by weight. Natural woods vary in density which could cause the fan to wobble even though all blades are weight-matched. The following procedures should eliminate most of the wobble. Check for wobble after each step.

1.Check that all blades are screwed firmly into blade holders.

2.Check that all blade holders are tightened securely to motor.

3.Make sure that canopy and mounting bracket are tightened securely to ceiling joist.

4.Most fan wobble problems are caused when blade levels are unequal. Check this level by selecting a point on the ceiling above the tip of one of the blades.Measure this distance as shown in Figure 1. Keeping measure within 3mm, rotate the fan until the next blade is positioned for measurement. Repeat for each blade. If all blade levels are not equal, you can adjust blade levels by the following procedure. To adjust a blade tip down, insert a washer (not supplied) between the blade and blade holder at the screw closest to the motor (Figure 2). To adjust a blade tip up, insert washer (not supplied) between the blade and blade holder at the two screws farthest from the motor (Figure 2).

5.If blade wobble is still noticeable, interchanging two adjacent (side by side) blades can redistribute the weight and possibly result in smoother operation.

1.Check to see that the wire connections in the switch housing are connected.

2.Check for faulty light bulbs.

3.If light kit will still not operate, contact a qualified electrician for assistance.

78019, 78022, 78571, 78025, 78572 specifications

Westinghouse has long been synonymous with innovation and quality in the realm of electrical products. Among its numerous offerings, the Westinghouse models 78022, 78020, 78572, 78570, and 78021 stand out for their advanced technologies, reliability, and user-friendly features.

The Westinghouse 78022 is known for its superior durability and efficiency, featuring a robust construction that ensures longevity. It comes equipped with advanced thermal overload protection, which safeguards the motor from overheating, thus extending its lifespan. Its versatile design makes it suitable for various applications, whether in residential or commercial settings.

The 78020 model is celebrated for its compact design and high power-to-size ratio, making it an excellent choice for users seeking maximum performance in limited spaces. It also incorporates a multi-speed option, providing adaptability for different requirements. With its energy-efficient motor, the 78020 reduces electricity consumption without compromising output, making it an environmentally friendly option.

Model 78572 features a premium, full-metal housing that provides exceptional protection against external elements, ensuring consistent performance even in harsh environments. It boasts a noise-dampening design, making it quieter than many competitors, which is particularly advantageous in noise-sensitive areas. The 78572 also integrates advanced airflow technology, enhancing cooling efficiency and improving overall operation.

The Westinghouse 78570 is a high-capacity option designed for industrial applications. It includes features such as a heavy-duty construction and reinforced components that can handle continuous operation. The model is equipped with intelligent control systems that offer real-time monitoring of performance metrics, allowing for timely maintenance and operational efficiency.

Finally, the 78021 model is engineered for ease of use, featuring a simple interface that allows even novice users to operate it effectively. With built-in safety features such as automatic shut-off and surge protection, it prioritizes user safety. Additionally, the 78021's lightweight design enhances portability, making it ideal for job sites or temporary installations.

In summary, the Westinghouse models 78022, 78020, 78572, 78570, and 78021 collectively showcase the brand's commitment to quality, efficiency, and user satisfaction. Through a combination of robust construction, innovative technology, and user-friendly features, these models serve a diverse range of applications without compromising on performance or safety.