Mounting and Wiring Instructions

NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fixtures meet all UL specifications.

1.Turn off power at circuit box to avoid possible electric shock.

2.Thread mounting screws (A) into mounting bar (B) (may be preinstalled) (see fig. 1).

3.Secure mounting bar (B) to outlet box (C) with outlet box screws (D) (not included).

4.Line up holes in canopy (E) with holes in fiberglass insulation (if applicable).

5.Identify color coding of fixture wires (see fig. 2).

6.To connect wires, take black fixture wire (group A from fig. 2) and place evenly against black outlet box wire. Do not twist wires.

7.Fit wire connector (F from fig. 1) overwires and twist until there is a firm connection. If wire connector (F) easily comes off, reattach and check again for a firm connection.

8.Repeat steps 6 and 7with the white (group B from fig. 2) fixture wires and outlet box wires.

9.Partially thread green grounding screw (G) into side hole (H) on mounting bar (B) (see fig. 1).

10.Wrap ground wire from fixture around green grounding screw (G) leaving enough excess wire to then connect ground wire and outlet box wire with wire connector (F) (if applicable).

11.Tighten green grounding screw (G).

12.Tuckwires inside outlet box (C) (see fig. 1).

FIXTURE ASSEMBLY INSTRUCTIONS

Warning: This fixture is for indoor use only.

1.Raise canopy (E) to ceiling allowing mounting screws (A) to protrude through openings in canopy (E) and secure into place with cap nuts (I).

2.Install lamp(s). Do not exceed recommended wattage.

3.Place glass shade (J) into holder (K) and secure with thumb screws (L).

4.Turn power back on at circuit box.

81104 specifications

The Westinghouse 81104 is a versatile and high-performance circuit breaker designed primarily for residential and commercial electrical applications. Known for its reliability and efficient performance, the 81104 has become a popular choice among electricians and engineers alike. One of its main features is its compact design, which allows for easy installation and integration into various electrical systems.

This circuit breaker is equipped with a dual-function mechanism that provides both overload and short-circuit protection, ensuring the safety of electrical circuits. This capability is vital in preventing electrical fires and equipment damage due to excessive current flow. The Westinghouse 81104 also offers a thermal magnetic tripping mechanism, a hallmark of advanced circuit breakers. This feature enables the breaker to react promptly to surges in current while providing a delay mechanism for sustained overloads.

Another standout characteristic of the 81104 is its ability to handle a robust current rating, making it suitable for a range of applications, from light residential loads to more demanding commercial environments. The simple yet effective toggle switch allows users to manually reset the breaker after it has tripped, streamlining maintenance and ensuring continuity of service.

In terms of technology, the Westinghouse 81104 employs state-of-the-art materials to enhance durability and performance. The contacts are made from high-quality conductive materials, ensuring minimal resistance and maximum efficiency. Additionally, the breaker features an environmental rating that makes it suitable for various climates and conditions, adding to its versatility.

The design of the 81104 emphasizes ease of use with clear labeling and intuitive operation. Its lightweight construction further simplifies the installation process, allowing it to be mounted securely in a matter of minutes.

Overall, the Westinghouse 81104 circuit breaker combines innovation, reliability, and efficiency, making it a cornerstone in modern electrical safety solutions. Its robust features ensure that it meets the demands of both residential and commercial applications, while its advanced technologies provide peace of mind for users concerned about electrical safety and performance.