Assembly Instructions

Before assembling, please review all instructions.

1.Carefully open box to avoid damaging the lamp when using a sharp knife.

2.Remove lamp (fully assembled) and set on table.

3.Remove shade from box.

4.Remove socket ring (A) from Socket (B). Fit lamp shade onto socket

(B) and replace the socket ring (A). Hand tighten the socket ring

– do not over-tighten.

5.Carefully insert one GU-24 Natural Spectrum® light bulb (included) into lamp by ﬁrmly holding bulb base and pushing down and rotating slightly in a clockwise direction to seat properly.

Note: Make sure bulb is fully inserted into the socket. The bottom of the bulb base should touch the plastic housing of the lamp.

6.Plug lamp into an appropriate outlet and turn on the switch.

7.Do not use with an extension cord or on a circuit with a dimmer switch.

8.Save the packaging in case you need to send the lamp to Verilux for servicing.