General Precautions

•Do not use with power supply voltage other than 120V AC

•Avoid placing the lamp in areas that are dusty, humid/moist, lack ventilation, or are subject to constant vibration.

•Not for use with light dimmers, timers, motion detectors, voltage transformers, or extension cords.

•Do NOT use lubricating agent in bulb assembly.

•The light bulb may become loose during transit. To reinstall the light bulb, see the bulb installation instructions on page 3.

•Close supervision is recommended when this lamp is used by or near children, or others who may not understand the need for these precautions. Do not leave the lamp unattended during use.

This lamp has been tested and found to comply with Part 18 of the FCC Rules. These limits are designed to provide reasonable protection against interference in a residential installation. This lamp generates, uses, and can radiate radio frequency energy and, if not used in accordance with the instructions, may cause interference to radio communications. If interference occurs try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the lamp and receiver.

•Connect the lamp into an outlet on a circuit different from that to which the receiver is connected.

•Move the lamp out of the line of sight of the remote control receiver.

•Consult the dealer or an experienced radio/TV technician for help.