INSTRUCTIONS FOR USE
Hanging the ClearWave®
Place the screw included into the wall leaving approximately 3mm between the screw head and the wall. Be sure to use an the included anchor if mounting into sheet rock or other soft material. Insert the screw head into the hole located in the upper part of unit. (Figure 2).
Figure 2
Standing the ClearWave® on a Table Top
Unfold the stand on back of lamp (Figure 3) and place the ClearWave® on a stable, flat surface.
Figure 3
Transporting the Unit
The ClearWave® is very light and easy to carry. There is a convenient handle located on the back (Figure 4).
Figure 4
6