Verilux CWST1 manual Bulb Replacement Instructions, Opening Lens Cover, Opening Bulb Clips

Page 7

BULB REPLACEMENT INSTRUCTIONS

Step 1: Opening the

Lens Cover

Place the ClearWave® on its back on a large ﬂat surface. Press down gently on the center of the lens cover. (See Figure 5). This releases the locking tabs located under the grey handles. Open the lens cover by grasping the grey handles with your hands. Remove the lens and gently place it next to the unit with the logo face up.

Step 2: Opening the

Bulb Clips

Locate the clear plastic clips across each ﬂuorescent tube (Figure 6). Put a ﬁnger under the clear plastic clip on the outer side and pull up (See Figure 7). The clip should pop open. Repeat on other side.

Image 7

Contents CWST1 Main Parts & Controls General PrecautionsIt is advisable that you contact a doctor if Important Safety InstructionsThis Product Must be Grounded Instructions for USE Standing the ClearWave on a Table Top Hanging the ClearWaveTransporting the Unit Opening Lens Cover Bulb Replacement InstructionsOpening Bulb Clips Removing Bulbs Installing New BulbsReplacing the Lens Cover Closing the Bulb ClipsDoes not illuminate Care & CleaningTroubleshooting Light ﬂickers