Jasco ZWAVEKIT manual Invert Switch, Dim Rate Adjustments

Page 19

-Parameter No: 3

-Length: 1 Byte

-Valid Values = 0 or 1 (default 0)

Invert Switch

If the dimmer switch is accidentally installed upside down with “On” at the bottom and “Off” at the top, the default On/Off rocker settings can be reversed by changing parameter 4’s value to “1”.

-Parameter No: 4

-Length: 1 Byte

-Valid Values = 0 or 1 (default 0)

Dim Rate Adjustments

Both the number of steps (or levels) that the dimmer will change and the timing of the steps can be modified to suit personal preferences. The timing of the steps can be adjusted in 10 millisecond intervals. As an example, the default setting for parameter 8 is “3”. This means that the lighting level will change every 30 milliseconds when the Dim Command is received. A value of 255 would mean that the level would change every

2.55seconds. Combined, the two parameters allow dim rate adjustments from 10 milliseconds to 4.2 minutes to go from maximum-to-minimum or minimum-to-maximum brightness levels.

1.When Receiving a Z-Wave Dim Command - Parameter 7 (number of steps or levels)

- Parameter 8 (timing of the steps) - Length: 1 Byte

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Dimmer Switch Kit Introduction Dimmer switch LED light Air gap switch Controlling Appliances Risk of Fire Risk of Electrical Shock Risk of BurnsWireless Range Number of Walls or Obstacles Type of ConstructionImportant Note about 3-WAY Circuits Typical 3-way circuit Installation Yellow Wiring DigramNumber of Dimmers Heat Sink Single, Dual and Triple Gang Boxes45607 45610 Shock Hazard Observe Important Wiring InformationAir Gap Switch Wire Connector / Combination ChartInstructions Manual Control Key FeaturesPage Four possible responses are All On/All OffLED Light Dim Rate Adjustments Invert SwitchPage Interoperability with Z-WaveDevices Restoring Factory DefaultsOperation is subject to the following two conditions U2Z45606-7Compliance with IC Rules and Regulations This Class B digital device complies with Canadian ICES-003

ZWAVEKIT specifications

The Jasco ZWAVEKIT is an essential toolkit designed for both DIY enthusiasts and professional installers looking to enhance their smart home capabilities. As a comprehensive package, it includes a range of components that work seamlessly within the Z-Wave ecosystem, allowing users to build and expand their smart home networks with ease.

One of the key features of the ZWAVEKIT is its compatibility with a variety of Z-Wave devices, offering an easy way to control lighting, thermostats, locks, and other smart devices from a single point of access. This interoperability is particularly beneficial for users who want to mix and match products from different manufacturers, providing a flexible and customizable smart home experience.

The kit typically includes Z-Wave dimmer switches, smart plugs, and motion sensors, all of which can be integrated into a home automation system to create a more responsive environment. For example, the Z-Wave dimmer switch allows users to control lighting levels wirelessly, while smart plugs enable remote management of plugged-in devices, promoting energy efficiency and convenience.

Another significant characteristic of the Jasco ZWAVEKIT is its user-friendly setup process. The kit typically comes with detailed instructions, making it accessible for individuals with varying levels of technical expertise. Whether you are installing a single device or an entire network, the intuitive setup process minimizes the time and effort required to get your smart home up and running.

The ZWAVEKIT employs Z-Wave technology, a robust and reliable wireless communication protocol specifically designed for smart home devices. Z-Wave operates on a low frequency, which reduces interference from other wireless networks and provides a more stable connection. This results in a reliable network that can cover greater distances, ensuring that devices can communicate effectively throughout the home.

Security is also a top priority with the Jasco ZWAVEKIT. The Z-Wave protocol includes advanced encryption standards, safeguarding communications between devices and protecting against unauthorized access. This ensures that users can operate their smart home with peace of mind, knowing that their personal data and devices are secure.

In summary, the Jasco ZWAVEKIT is an excellent choice for anyone looking to create or expand a smart home. With its compatibility with various Z-Wave devices, easy installation process, and secure communication technology, it offers both flexibility and practicality. As smart home technology continues to evolve, the ZWAVEKIT stands out as a reliable foundation for building efficient and interconnected living spaces.
Top Page Image Contents