Jasco ZWAVEKIT manual Important Note about 3-WAY Circuits

Page 7

Please Note: Z-Wave home control networks are designed to work properly alongside 802.11 wireless computer networks, Bluetooth® and other 2.4GHz or 5.8GHz devices. Some baby cams, wireless video devices and older cordless phones using the 900MHz frequency range may cause interference and limit Z-Wave functionality. Many 900MHz products have a switch to select channel “A” or “B”. You may find that one of these channels will cause less interference than the other.

IMPORTANT NOTE ABOUT 3-WAY CIRCUITS

The term “3-way circuit” refers to a circuit with two switches and one load (light) like you find at the top and bottom of a stairway. There are many ways to physically wire a 3-way circuit and it is important to understand how the circuit you wish to upgrade to Z-Wave control is wired. Below is a description of a typical 3-way circuit.

One of the ways to wire a two-switch/one-load circuit is to route the incoming power through the first switch, then to the second switch and then to the load. Although very common and by no means a standard, it is the easiest to convert to Z-Wave control. With this type of circuit, Switch 1 is replaced by the Z-Wave auxiliary switch and Switch 2 is replaced with the primary Z-Wave dimmer switch. The auxiliary switch does not actually control the power; instead, it sends a momentary voltage signal through the traveler wire to the primary switch which in turn, controls the power to the load. In the configuration shown, if the two Z-Wave switches are reversed, Z-Wave Dimmer Switch will not be able to control the load without additional wiring.

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Dimmer Switch Kit Introduction Dimmer switch LED light Air gap switch Controlling Appliances Risk of Fire Risk of Electrical Shock Risk of BurnsWireless Range Number of Walls or Obstacles Type of ConstructionImportant Note about 3-WAY Circuits Typical 3-way circuit Installation Yellow Wiring DigramNumber of Dimmers Heat Sink Single, Dual and Triple Gang Boxes45607 45610 Shock Hazard Observe Important Wiring InformationAir Gap Switch Wire Connector / Combination ChartInstructions Manual Control Key FeaturesPage Four possible responses are All On/All OffLED Light Dim Rate Adjustments Invert SwitchPage Interoperability with Z-WaveDevices Restoring Factory DefaultsOperation is subject to the following two conditions U2Z45606-7Compliance with IC Rules and Regulations This Class B digital device complies with Canadian ICES-003

ZWAVEKIT specifications

The Jasco ZWAVEKIT is an essential toolkit designed for both DIY enthusiasts and professional installers looking to enhance their smart home capabilities. As a comprehensive package, it includes a range of components that work seamlessly within the Z-Wave ecosystem, allowing users to build and expand their smart home networks with ease.

One of the key features of the ZWAVEKIT is its compatibility with a variety of Z-Wave devices, offering an easy way to control lighting, thermostats, locks, and other smart devices from a single point of access. This interoperability is particularly beneficial for users who want to mix and match products from different manufacturers, providing a flexible and customizable smart home experience.

The kit typically includes Z-Wave dimmer switches, smart plugs, and motion sensors, all of which can be integrated into a home automation system to create a more responsive environment. For example, the Z-Wave dimmer switch allows users to control lighting levels wirelessly, while smart plugs enable remote management of plugged-in devices, promoting energy efficiency and convenience.

Another significant characteristic of the Jasco ZWAVEKIT is its user-friendly setup process. The kit typically comes with detailed instructions, making it accessible for individuals with varying levels of technical expertise. Whether you are installing a single device or an entire network, the intuitive setup process minimizes the time and effort required to get your smart home up and running.

The ZWAVEKIT employs Z-Wave technology, a robust and reliable wireless communication protocol specifically designed for smart home devices. Z-Wave operates on a low frequency, which reduces interference from other wireless networks and provides a more stable connection. This results in a reliable network that can cover greater distances, ensuring that devices can communicate effectively throughout the home.

Security is also a top priority with the Jasco ZWAVEKIT. The Z-Wave protocol includes advanced encryption standards, safeguarding communications between devices and protecting against unauthorized access. This ensures that users can operate their smart home with peace of mind, knowing that their personal data and devices are secure.

In summary, the Jasco ZWAVEKIT is an excellent choice for anyone looking to create or expand a smart home. With its compatibility with various Z-Wave devices, easy installation process, and secure communication technology, it offers both flexibility and practicality. As smart home technology continues to evolve, the ZWAVEKIT stands out as a reliable foundation for building efficient and interconnected living spaces.
Top Page Image Contents