JVC HR-S7960E 10 EN, Check the contents, Situate the recorder, Connect the recorder to TV

Page 10

10 EN

INSTALLING YOUR NEW RECORDER

Basic Connections

Aerial connector

Back of TV

21-pin SCART

TV aerial

connector

cable

21-pin SCART

 

cable

RF cable

(not provided)

 

(provided)

Mains power cord

ANT. IN

Back of recorder

AV1 (L-1) IN/OUT RF OUT

Mains outlet

Make AV connection if your TV has a 21-pin AV input connector (SCART) in order to reduce the possibility of interference. With AV connection, you can enjoy stereo playback of video tapes if you are using a stereo TV.

NOTES:

The AV1 (L-1) IN/OUT connector accepts and delivers either a composite signal (regular video signal) or a Y/C signal (a signal in which the luminance and chrominance signals are separated). If your TV’s 21-pin AV input connector (SCART) is compatible with the Y/C signal, set

“L-1 OUTPUT” to “S-VIDEO” after the connection and the initial settings are completed ( pg. 42). You can obtain high-quality S-VHS pictures. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

Set your TV to the VIDEO (or AV), Y/C, or RGB mode according to the type of your TV’s SCART connector.

For switching the TV’s mode, refer to the instruction manual of your television.

To obtain high-quality S-VHS pictures, you can also use the S-VIDEO connection described on page 11.

It’s essential that your video recorder be properly connected.

THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PERFORMED.

A Check the contents.

Make sure the package contains all of the accessories listed in “SPECIFICATIONS” on page 66.

B Situate the recorder.

Place the recorder on a stable, horizontal surface.

C Connect the recorder to TV.

The connection method you use depends on the type of TV you have.

RF Connection

8To connect to a TV with NO AV input connectors . . .

ADisconnect the TV aerial cable from the TV.

BConnect the TV aerial cable to the ANT. IN connector

on the rear panel of the recorder.

CConnect the provided RF cable between the RF OUT connector on the rear panel of the recorder and the TV’s aerial connector.

AV Connection

8To connect to a TV with AV input connectors . . .

AConnect the aerial, recorder and TV as per “RF

Connection”.

BConnect an optional 21-pin SCART cable between the AV1 (L-1) IN/OUT connector on the rear panel of the recorder and the TV’s 21-pin SCART connector.

D Connect the recorder to mains.

Plug the end of the mains power cord into a mains outlet.

After the connection is completed, perform “Auto Set Up” on page 12.

Image 10
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Playback or recording time exceeds this limit Counter can display up to +/ 195959. IfTape Speed SP/LP/EP  pg ON-SCREEN Display Remote Control How To Use Operating JVC TVsSituate the recorder Check the contents10 EN Connect the recorder to TV8To connect to a TV with S-VIDEO/AUDIO in connectors Video ConnectionTurn on the recorder Auto Set Up12 EN Select your countryConfirm/Set video channel Perform Auto Set UpSelect the language On the front display panelSet the video channel Perform Preset Download14 EN Press rt to select CH - and press OK or eLanguage for the on-screen display Just ClockLanguage Access the Main Menu screenAccess the Country Set screen 16 ENAttach the Satellite Controller Installing Satellite ControllerSituate the Satellite Controller Make connectionsSetting satellite receivers brand and channel 18 ENNextView Link TV Auto Power OnVCR Auto Standby Direct Rec Basic Playback 20 ENPause during playback Slow MotionPicture Search Activate frame-by-frame playbackIndex Search 22 ENVariable Speed Search Skip SearchManual Tracking Next Function MemoryRepeat Playback Soundtrack Selection24 EN Instant Timer Recording ITR Tape Remaining TimeSuper VHS ET S-VHS ET Engage the S-VHS ET mode26 EN Receiving Stereo and Bilingual ProgrammesPlayback RecordingBefore performing the Showview Timer Programming Access the Showview screenAccess the Showview Program screen 28 ENEngage the recorder’s timer mode Set the VPS/PDC modeAccess the Title Edit screen Enter the programme titleExpress Timer Programming 30 ENEnter the channel position To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Press PR+32 EN Enter the programme modeBefore performing the 24 Hour Express Timer Programming Set the programme start/stop time and channelReturn to the timer mode Disengage the timer modeCancel or change a programme Access the Programme Check screen/displaySelect the programme to modify Cancel or change programme settingConfirm the overlapping programmes Overlapping programmes blink on the TV screenProgramme Recording Select the L-2 Select modeRecording mode Before performing the following stepsNavigation 36 ENLoad a recorded cassette Navigation PlaybackProgramme Navigation Screen Select a programmeEdit Programme Title 38 ENSelect the programme Delete the tape data Entering CharacterDelete Tape Data Example Enter JVC NewsCamcorder Edit From a40 EN Advantages of S-VHS video recorders Set the input mode of recording deckAnother Start the source playerOutput/Input Set Select and L-2 Input Setting Decoder connectorConnecting To a Satellite Receiver Simple ConnectionsPerfect Connections Connect the decoder Select the input mode46 EN Set the tunerConnecting/Using a Stereo System Make connectionsSelect the mode Mode SetAccess the Mode Set screen Select the mode settingWith old tapes and rental cassettes Using this video recorder as the source player for editingRecorder is powered back on We recommend that you set Digital TBC/NR to on when50 EN On the remote control, or press 7 on the recorderEntire programme while timer-recording in SP mode Function  pg , set PROG. Navigation to OFFMode setting Indicator lights up on the front display panelS-VHS recording mode is selected VHS recording mode is selected52 EN Colour SystemTuner Set Access the Auto Channel Set screenAuto Channel Set View the Confirmation screen 54 ENPerform Auto Channel Set Press OK twiceManual Channel Set 56 EN When Receiving a Scrambled BroadcastDelete a Channel Set Stations a Set Stations B58 EN TV Station And ID ListAccess the Clock Set screen Clock SetSet Just Clock 60 ENSet the date and time Set the source channel position for clock dataVideo Channel Set Access the Video Channel Set modeExit the Video Channel Set mode Set the RF output systemTroubleshooting 62 ENRecording Troubleshooting 64 ENPlayback 66 EN Preset Download Auto Set UpExpress Timer Programming Tape Position Indicator Tape Remaining Time

HR-S7960E specifications

The JVC HR-S7960E is a standout model in the world of VHS players and recorders, particularly noted for its impressive blend of features, technologies, and characteristics that resonate well with enthusiasts of vintage video. As part of JVC's esteemed line of S-VHS recorders, the HR-S7960E was designed to meet the needs of users who demand high-quality playback and recording capabilities.

One of the primary features of the HR-S7960E is its S-VHS playback and recording capability. S-VHS offers a superior resolution compared to standard VHS, allowing for clearer and more vibrant images. This feature is particularly beneficial for users seeking to preserve older videotapes with enhanced visual fidelity. The HR-S7960E also supports standard VHS formats, providing versatility in handling various tape formats.

A notable characteristic of the HR-S7960E is its built-in Time Base Corrector (TBC) function. This technology minimizes video artifacts such as jitter and shearing, ensuring smoother playback of tapes that may have suffered degradation over time. The TBC feature is essential for video preservation, especially for films and home videos that are decades old.

The HR-S7960E is equipped with a dual-head playback system, which contributes to improved picture quality while reducing the risk of wear on the tape over time. This design maximizes the lifespan of both the machine and the tapes it plays, a vital consideration for collectors and archivists.

Additionally, the VCR comes with advanced video processing technology, such as the Frame Creation and Digital Noise Reduction features. These enhancements work to improve the quality of the video output by reducing noise and enhancing detail, making a noticeable difference, especially when playing back older tapes that may not have had the best recording conditions.

Connectivity is another strong point for the HR-S7960E. The unit includes various inputs and outputs, including S-Video, composite, and RF connections. This broad range of options allows users to seamlessly connect to a variety of televisions and editing equipment.

Overall, the JVC HR-S7960E embodies the pinnacle of VHS technology, encapsulating a nostalgia for an era of video while providing modern users with the means to enjoy and preserve their video collections. With its impressive array of features, the HR-S7960E remains a cherished choice among videophiles and collectors alike.