JVC HR-S7960E specifications How To Use, Operating JVC TVs

Page 9

EN 9

Buttons with a small dot on the left side of the name can also be used to operate your JVC TV while holding down the TV button. ( “Operating JVC TVs” below)

This remote control transmits A code signals only; it is not applicable to B code signals.

How To Use

The remote control can operate most of your video recorder’s functions, as well as basic functions of JVC TV sets. ( “Operating JVC TVs” below)

●Point the remote control toward the receiving window.

●The maximum operating distance of the remote control is about 8 m.

Operating JVC TVs

To operate your TV, while holding down the TV button, press the corresponding button: 1, TV/VCR, TV PR +/–, TV %+/–,

^(TV Muting).

NOTES:

●When inserting the batteries, be sure to insert in the correct directions as indicated under the battery cover.

●Depending on the type of JVC TV, some or all functions may not be operated using the remote control.

●If the remote control doesn’t work properly, remove its batteries, wait a short time, replace the batteries and then try again.

Image 9

Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Counter can display up to +/ 195959. If Playback or recording time exceeds this limit Tape Speed SP/LP/EP pg ON-SCREEN Display Remote Control Operating JVC TVs How To Use10 EN Check the contentsSituate the recorder Connect the recorder to TVVideo Connection 8To connect to a TV with S-VIDEO/AUDIO in connectors12 EN Auto Set UpTurn on the recorder Select your countrySelect the language Perform Auto Set UpConfirm/Set video channel On the front display panel14 EN Perform Preset DownloadSet the video channel Press rt to select CH - and press OK or eJust Clock Language for the on-screen displayAccess the Country Set screen Access the Main Menu screenLanguage 16 ENSituate the Satellite Controller Installing Satellite ControllerAttach the Satellite Controller Make connections18 EN Setting satellite receivers brand and channelTV Auto Power On NextView LinkVCR Auto Standby Direct Rec 20 EN Basic PlaybackPicture Search Slow MotionPause during playback Activate frame-by-frame playbackVariable Speed Search 22 ENIndex Search Skip SearchRepeat Playback Next Function MemoryManual Tracking Soundtrack Selection24 EN Tape Remaining Time Instant Timer Recording ITR26 EN Engage the S-VHS ET modeSuper VHS ET S-VHS ET Receiving Stereo and Bilingual ProgrammesRecording PlaybackAccess the Showview Program screen Access the Showview screenBefore performing the Showview Timer Programming 28 ENAccess the Title Edit screen Set the VPS/PDC modeEngage the recorder’s timer mode Enter the programme title30 EN Express Timer ProgrammingVPS/PDC Recording To Timer-Record Weekly Or Daily SerialsEnter the channel position Press PR+Before performing the 24 Hour Express Timer Programming Enter the programme mode32 EN Set the programme start/stop time and channelCancel or change a programme Disengage the timer modeReturn to the timer mode Access the Programme Check screen/displayConfirm the overlapping programmes Cancel or change programme settingSelect the programme to modify Overlapping programmes blink on the TV screenRecording mode Select the L-2 Select modeProgramme Recording Before performing the following steps36 EN NavigationProgramme Navigation Screen Navigation PlaybackLoad a recorded cassette Select a programme38 EN Edit Programme TitleSelect the programme Delete Tape Data Entering CharacterDelete the tape data Example Enter JVC NewsEdit From a Camcorder40 EN Another Set the input mode of recording deckAdvantages of S-VHS video recorders Start the source playerOutput/Input Set Decoder connector Select and L-2 Input SettingSimple Connections Connecting To a Satellite ReceiverPerfect Connections 46 EN Select the input modeConnect the decoder Set the tunerMake connections Connecting/Using a Stereo SystemAccess the Mode Set screen Mode SetSelect the mode Select the mode settingRecorder is powered back on Using this video recorder as the source player for editingWith old tapes and rental cassettes We recommend that you set Digital TBC/NR to on whenEntire programme while timer-recording in SP mode On the remote control, or press 7 on the recorder50 EN Function pg , set PROG. Navigation to OFFS-VHS recording mode is selected Indicator lights up on the front display panelMode setting VHS recording mode is selectedColour System 52 ENAccess the Auto Channel Set screen Tuner SetAuto Channel Set Perform Auto Channel Set 54 ENView the Confirmation screen Press OK twiceManual Channel Set When Receiving a Scrambled Broadcast 56 ENDelete a Channel Set Stations B Set Stations aTV Station And ID List 58 ENClock Set Access the Clock Set screenSet the date and time 60 ENSet Just Clock Set the source channel position for clock dataExit the Video Channel Set mode Access the Video Channel Set modeVideo Channel Set Set the RF output system62 EN TroubleshootingRecording 64 EN TroubleshootingPlayback 66 EN Express Timer Programming Auto Set UpPreset Download Tape Position Indicator Tape Remaining Time