Attaching a Ceiling Recessed Bracket

In the case of VN-C625U, install the Converter Unit (supplied with VN-C625U) in the ceiling before mounting the
Ceiling Recessed Bracket.
	CAUTION
1.
		Recessed Bracket can be mounted to ceiling
	The Ceiling
	materials with a thickness between 5 mm to 31 mm (1/4

inch to 1 1/4 inch).

Alignment Mark (&)

Mounting screws

(4 locations)

Clamping brackets

Clamping screws

(3 locations)

Screw driver

1. Make a hole in the ceiling (φ165 mm (6 1/2 inch)) for inserting the Ceiling Recessed Bracket.

2. Remove the mounting screws.

● Use these mounting screws (4 locations) to mount the

ceiling mount of the camera.

3. Perform the following prior to inserting the

Ceiling Recessed Bracket into the ceiling.

● Check that the orientation of the clamping bracket is as

shown in the diagram.

● If the clamping bracket is not installed all the way up, do

so by turning the clamping screws of the Ceiling Recessed

4. CeilingRecessed Bracket Upper chart

Side chart

Stopper

Anchor bolt 5. Hexagon Nut

Clamping brackets

Anchor bolt mount hole

Alignment Mark (&)

When anchor bolts cannot be used

Safety cable

Alignment Mark (&)

Bracket in the counter-clockwise direction. (3 locations)

4. Insert the Ceiling Recessed Bracket into the

ceiling.

● Align the & mark on the Ceiling Recessed Bracket in the

direction that you want the camera to face, and insert the

Ceiling Recessed Bracket into the ceiling by tilting it as shown

in the diagram. The stopper will press against the rear of

the ceiling and hold the Ceiling Recessed Bracket in place.

5. Fasten the Ceiling recessed Bracket.

● Push the Ceiling Recessed Bracket all the way upward

towards the ceiling.

● Turn the clamping screws in the counter-clockwise direc-

tion, and fasten upon clamping the ceiling material with

the clamping bracket. (3 locations)

● If anchor bolts can be used, attach M8 to M10 (or 3/8 inch)

anchor bolts into the anchor bolt mount hole on the Ceiling

Recessed Bracket and tighten using a hexagon nut.

● If anchor bolts cannot be used, ensure to install a safety

cable.

CAUTION

●Make sure that the clamping blackets grip the ceiling plate firmly. If the Ceiling Recessed Bracket rattles after the clamping screws.

●For the used safety cable, pay particular caution to the length, strength, pull, material, etc.

6. Connect cables to the Ceiling mount.

● For details, please refer to the “INSTRUCTIONS” sec-

tion of the camera in use.

7. Attach the Ceiling mount to the Ceiling Re-

cessed Bracket.

Front Mark (•)

Ceiling mount

● Attach the ceiling mount supplied with the camera to the

Ceiling Recessed Bracket, be careful not to catch the

cables. Use the mounting screws (4 locations) that have

been removed in Step 2. When attaching, align the

FRONT mark (•) of the ceiling mount with the & mark of

the Ceiling Recessed Bracket.

8. Attach the camera to the Ceiling mount.

● Perform the necessary camera settings before attaching.

● For details, please refer to the “INSTRUCTIONS” sec-

tion of the camera in use.

9. Attach the Ceiling Panel.

	Mounting screws	● Refer to “Attaching a Ceiling Panel” on the next page.
	(4 locations)	● Refer to “Attaching a Ceiling Panel” on the next page.
	(4 locations)

WB-S625U specifications

The JVC WB-S625U is a state-of-the-art network camera designed for high-performance surveillance applications. This camera stands out due to its exceptional image quality, advanced features, and user-friendly design, making it an ideal choice for various environments, including urban settings, retail establishments, and transportation hubs.

One of the most notable features of the WB-S625U is its 4K Ultra HD resolution, which delivers crisp and detailed images even in challenging lighting conditions. The camera utilizes a 1/2.7-inch CMOS sensor that ensures excellent low-light performance, allowing for clear video capture even in dimly lit areas. With a maximum resolution of 3840 x 2160 pixels, the WB-S625U provides an expansive field of view, making it easier to monitor larger spaces.

The camera is equipped with advanced video compression technologies, including H.265 and H.264, which significantly reduce bandwidth requirements while maintaining high image quality. This is particularly advantageous for installations with limited network capacity, as it allows for efficient streaming and storage of video footage.

Another prominent feature of the JVC WB-S625U is its ability to support Power over Ethernet (PoE). This simplifies installation by allowing a single cable to provide both power and data to the camera, eliminating the need for multiple power sources and reducing cable clutter.

The WB-S625U also incorporates intelligent video analytics capabilities, such as motion detection, line crossing detection, and face detection, which enhances its surveillance functionality. These analytics allow for proactive monitoring and alerting, enabling security personnel to respond quickly to potential threats.

Furthermore, the camera is designed for durability in various environmental conditions, featuring an IP66-rated housing that protects against dust and water. This ensures reliable operation even in harsh weather conditions, making it suitable for both indoor and outdoor use.

The user interface of the JVC WB-S625U is intuitive, providing easy access to settings and configurations through its web-based platform. This allows users to customize various parameters, including image settings, video output, and network configurations, for optimal performance in their specific surveillance scenarios.

In conclusion, the JVC WB-S625U is a powerful and versatile network camera that combines high-resolution imaging, advanced video analytics, and robust build quality, making it an excellent choice for diverse surveillance needs. Its seamless integration into existing security systems, along with its easy installation process, positions the WB-S625U as a leading solution for modern surveillance challenges.