HoMedics WRF-COL instruction manual Assembly and Instructions for Use

Figure 1	Assembly and Instructions for Use
	1.	Unpack the product and place on a horizontal
		surface on top of the waterproof black mat
		provided. Wipe off dust with a damp cloth.
	2.	Remove the back cover (Fig 2).
	3.	Familiarize yourself with the pump. The pump
		speed is controlled by the dial located at the front
		of the pump. The speed is indicated by a “min”
		and “max” (Fig 1). At its highest speed level, the
		dial will cease to move any further. To decrease
		the pump speed, move the dial counter-clockwise
		toward the “min”sign. Similarly, at its lowest
		speed, the dial will cease to move any further.
	4.	Insert the plastic tubing from the right side into
		the pump. Place pump into fountain lower basin
		(Fig 2) and replace back cover.
	5.	Fill the lower basin with clean water. The water level
		should be approximately 1/2 an inch below the steel
		net (Fig 3). NOTE: Distilled water is
		recommended for easier maintenance.
	6.	Attach the A/C adaptor jack to the base. Plug the
		power cord into a 120V household outlet.
	7.	To turn on press the POWER button located on the
Figure 2		control panel (Fig 4),

Music Speaker		Water Flow Dial
Back Cover
		Plastic Tu b i n g
Lower Basin	Pump
AC Jack
		A d a p t o r
		B A C K V I E W

Figure 3

Water Flow Dial

C o n t r o l

Pa n e l

S t e e l

N e t

Sound

S e n s o r

F R O N T V I E W

Figure 4

L o o n s

Rain Fo r e s t

Summer Night

Wind Chimes

T h u n d e r

S u n r i s e

O f f

Vo l u m e

Light Speed

Sound Sensor

Po w e r

a red LED light will be illuminated to indicate it is on.

NOTE: When the unit is on the continu- ously changing colors will always be on.

8.To adjust the light speed, turn the LIGHT SPEED dial (Fig 4) clockwise to increase the speed and counter- clockwise to decrease.

9.To adjust rainfall speed, turn the water flow dial (Fig 2) clockwise to increase the rainfall and counter-clockwise to decrease. When dial stops in counter- clockwise motion, rainfall will come to a stop.

10.To use sounds, select your nature sound by pressing the sound button of your choice (Fig 4). Volume can be adjusted by turning the VOLUME dial (Fig 4) - clockwise to increase the volume and counter-clockwise to decrease the volume.

11.To turn sounds off press the OFF but- ton (Fig 4). NOTE: This will retain your volume setting for the next use.

12.To use the Sound Sensor™ feature press the SOUND SENSOR button (Fig 4). A red LED light will illuminate to indicate it is on. When this feature is engaged the lights will no longer continuously change colors. Instead the lights change color to the sounds in your environment by responding to the beat of music, environmental sounds and voices. To turn this feature off press the SOUND SENSOR button again and the red LED will turn off.

13.When you have finished using the fountain and sound machine turn the unit off by pressing the POWER button (Fig 4) and unplug the adaptor

from the base.

NOTE: Main power switch must be used to turn unit completely on or off.

-Fountain can be used independent of sound machine

-Sound Machine can be used without fountain water flowing, although pump will remain on.

4 5