Hunter Fan 30180 How the Hepatech System Works, Technical Support, Filter Ordering, Filter# Type

of the filter to the filter change chart located above the filter in the air purifier.

HEPAtechTM Filter	Front
Part# 30928
	Grill
Pre-Filter
Part# 30901

Figure 3 - Air Purifier Parts

How the Hepatech System Works

	Pet Hair &
Dust	Pollen Odors Bacteria Dander

Carbon HEPAtech® Ionizer

Pre-Filter Filter 99.97% – .1

Microns

The above is an illustration of how the HEPAtech™ air purification system works. Dust and other irritants are pulled into the air purification system and cleaned through the Carbon Pre-Filter, HEPAtech™ Filter, and by the ionizer. Clean, purified air is then released into the room through the top grill.

Technical Support

If you have any additional questions or problems with your Hunter Air Purifier, please call

1-888-830-1326 from 7:00 am to 7:00 pm Monday - Friday and 8:00 am to 5:00 pm on Saturday, Central Time. You may also contact us over the Internet at www.hunterfan.com.

Filter Ordering

Depending on usage and the environment, your Carbon Pre-Filter should be replaced every three months and your Hepatech filter should be replaced every 6 months.

Replacement filters are available at most retailers that carry Hunter Air Purifiers. You may also purchase directly from Hunter Fan Company by:

Phone: 1-888-830-1326

Website: www.hunterfan.com

*Applicable state and local taxes may apply.

*Prices are subject to change without notice.

*All orders will be shipped USPS or UPS Ground, allow 12-15 working days for delivery.

Filter#	Type
30928	Hepatech
30901	Pre-Filter

Troubleshooting

Problem:

No Operation.

Solution:

1.Confirm that the unit is plugged in.

2.Check the installation of the front grill.

Problem:

Erratic Operation

Solution:

1.Check the installation of the front grill.

Problem:

Unit has reduced air flow or increased noise.

Solution:

The filters may be clogged and needs to be replaced. (page 3)

©2010 Hunter Fan Company 4 43063-01 20100615