Air Purifier Maintenance

6.Place the Front Grill back onto the unit.

7.Plug in the Air Purifier.

8.To reset the Pre-Filters & Carbon Odor Filter Life Counter to zero, press and hold the Pre-Filters & Carbon Odor Filter Reset Key for three sec- onds. When the display shows 100%,, release the Key. The Counter is now reset.

Changing the QuietFlo® Main Filter

When the QuietFlo® Main Filter Life Counter reaches 0% (approximately 10 to 12 months of use), you should replace the filter. Refer to Filter Life Counters for ad- ditional information, pg. 9. The proper time to change the filter depends on usage and the environment. Generally, if you notice a decrease in air output or an increase in noise at any time during normal operation, the filter may be clogged. Replace the filter to return to normal operation.

To change the filter and reset the Filter Life Counter:

1.First, turn off and unplug the Air Purifier.

2.Next, remove the Front Grill. Place your fingers under the Grill Release Handle and pull up. Refer to Figs. 4 and 5 (pg. 6).

3.Lift the Filter Tab and gently pull the filter out of the unit. Refer to Fig. 6. While removing the filter, note the filter’s orientation - the new filter will be installed with the same orientation. Refer to Fig. 10. Once removed, the used filter can be discarded.

4.To install a new filter, position the filter with its rim facing the unit. Refer to Fig. 10.

FILTER RIM

FILTER FRAME

Fig. 10

42937-01