PYLE Audio ple420p features, DVD and AUX inputs, subwoofer/rear/front, channel outputs

owner’s manual

features

1.3.5mm DVD input jack Connects to the DVD source with 3.5mm plug cable.

2. DVD & AUX input switch to select the AUX or DVD inputs.

3.fader control • in a 2 Amplifier, 4 Speaker system, rotating the knob to the FRONT side increases the level of the front speakers; rotating to the REAR side increase level of the rear speakers. At mid position, both sets of speakers are at maximum level.

• in a 2 Speaker system, the fader control should be rotated to the position which provides highest levels for both sets of speakers.

4.volume control allows adjustment of sound level for particular program material or source.

5.subwoofer output volume this control adjusts output level of subwoofer RCA jack.

6.subwoofer frequency control lets you adjust the subwoofer crossover frequency point

from 30-250 Hz.

7-10. 4 band parametric equalizer controls	this four-band equalizer gives you to control over the
	output levels at various frequency.
11-12. DVD and AUX inputs	RCA cables are used to connect your car stereo head
	unit, DVD player, or other source to either the line or
	AUX inputs.
13-15. subwoofer/rear/front	RCA cables are used to connect the subwoofer channel
channel outputs	outputs to the subwoofer channel amplifier inputs, the
	rear channel outputs to the rear channel amplifier inputs,
	and the front channel outputs to the front channel
	amplifier inputs.
16-17. DVD/AUX input gain adjustments	allows you to adjust the left and right channel input
	sensitivity to match the output level from your DVD or
	auxiliary source.
power connections	connect to power source as follows:
	+12V: Connect a red wire of at least 12 gauge to the
	car battery or other power source.
	GROUND: Connect a black wire of at least 12 gauge
	to car chassis for ground connection
	REMOTE: Connect an orange wire to remote activating
	(12V DC) wire of car stereo or other head unit.

5