2 | Using Your Humidifier |
|
| ||
| Initial Setup and Operation |
|
Initial Setup:
1. Remove the plastic bag covering from the humidifier.
2. Unravel and straighten the cord before use.
3. Remove the tank from the humidifier base by grasping the tank handle, Figure 1., and pulling straight up. Figure 1 and Figure 2.
4. If you plan to use a demineralization cartridge, insert it now into the base of the unit. Figure 4
5. If you will be using a vapor pad in the unit, turn the base over and remove the vapor pad compartment grill. Insert 1 vapor pad into the compartment and reattach the compartment to the base of the unit. Figure 5.
6. Turn the tank upside down and twist the tank cap
7. Fill the unit with clean, cool tap water. Warning: Never fill the humidifier with hot water.
8. Place the tank cap back on the tank and turn clockwise till secure.
9. Seat the tank back into the humidifier base making sure the tank is seated securely.
NOTE: Failure to ensure the tank is seated correctly could cause the unit to leak water from the tank.
10. Plug the humidifier into a wall outlet and start the unit.
Tank Handle
Figure 1
Silver Ion | Demineral |
O
Rell Tank
Figure 2
Tank Cap
Figure 3
Demineralization
Cartridge
Figure 4
Figure 5
©2010 Hunter Fan Company
5 |