Using Your Humidifier
Initial Setup and Operation
Initial Setup:
1. Remove the plastic bag covering from the humidifier. 2. Unravel and straighten the cord before use.
3. Remove the tank from the humidifier base by grasping the
tank handle, Figure 1, and pulling straight up. Figure 2.
4. Turn the tank upside down and twist the tank cap counter- clockwise to remove. Figure 3.
5. Fill the unit with clean, cool tap water. Warning: Never fill the humidifier with hot water.
6. Place the tank cap back on the tank and turn it clockwise until secure.
7. Seat the tank back into the humidifier base, making sure the tank is seated securely.
NOTE: Failure to ensure the tank is seated correctly could cause the unit to leak water from the tank.
8. Plug the humidifier into a wall outlet and start the unit.
Operation:
1. To turn the humidifier on, turn the humidity adjustment knob clockwise until you feel the knob click. At this time the unit should be on and you can adjust the amount of mist the unit outputs by continuing to turn the knob clockwise. To turn the unit off, turn the humidity adjustment knob counter- clockwise until it clicks. Figure 4.
2. When the unit is out of water, the water level light will illuminate.Figure 4.
3. Refilling the water tank and placing it securely back on the base will turn this feature off. Figure 4.
2
Tank Handle
Figure 1
Water Level
Figure 2
Tank Cap
Figure 3
ON/OFF
Water Level
Figure 4
4 | |
|