Installation Precautions

ENGLISH

www.pioneerelectronics.com

Using the SP-C21 as a Center Speaker

The loudspeaker may be positioned above or below the TV. For best results align the front of the loud- speaker with the front of the TV. Due to the well-controlled vertical directivity, it is not normally necessary to vertically aim the loudspeaker towards the listener. If, however, the loudspeaker is placed under the TV and very close to the floor, then tilting upwards may be beneficial.

Follow the instruction for your receiver and set the center channel to NORMAL in Pro logic modes, or SMALL in Dolby and DTS modes. This will ensure that any bass signals encoded in the center channel are redirected to the front speakers or sub-woofer where they will be optimally reproduced. If you have a choice, set the crossover frequency to 100Hz.

It is recommended to use a sound level meter to setup the center channel level from the receiver. Adjust the receiver center volume until the center channel sound level is equal to that from the front left and right loudspeakers. In the absence of a meter, initially set the level of each channel to be identical. All models in the range have sufficiently close sensitivities such that this is a good starting point. Now play a wide selec- tion of movies and listen carefully to the clarity of dialog, particularly in the presence of other effects such as explosions. Adjust the level until the dialog is clearly but naturally presented.

For best results the loudspeakers should be positioned at or above ear level.

•Do not install this speaker system near a stove or other heating appliance, or put it in a place exposed to the sun. Such locations may cause the cabinet to change color and the speaker system to break down.

•Remember that the SP-FS51-LR, SP-BS21-LR, and SP-C21 are quite heavy, so it is dangerous to install them in high places such as on walls or pillars or in other unstable locations unless suitably secured in place.

Pioneer will not be responsible for any accidents or damage that may result from improper installation.

The SP-C21 is magnetically shielded. However, if the speaker system is installed too close to the screen of a television set, color distortion may occur.

If this happens, turn off the power switch of the television set, and turn it on after 15 to 30 minutes. If the problem persists, place the speaker system away from the television set.

CABINET MAINTENANCE

•Use a polishing cloth or dry cloth to wipe off dust and dirt.

•When the cabinet is very dirty, clean with a soft cloth dipped in some neutral cleanser diluted five or six times with water, and then wipe again with a dry cloth. Do not use furniture wax or cleaners.

•Never use thinner, benzine, insecticide sprays and other chemicals on or near the cabinets, since these will corrode the surfaces.

SP-BS21-LR specifications

PYLE Audio SP-BS21-LR is a compact bookshelf speaker system designed for audiophiles seeking quality sound without occupying too much space. These speakers are crafted to deliver an impressive audio experience, making them an excellent choice for music enthusiasts, gamers, and movie lovers alike.

One of the standout features of the SP-BS21-LR is its elegantly designed cabinet, which minimizes resonance and enhances sound clarity. The dense MDF construction contributes to improved bass response while reducing unwanted vibrations. This design element ensures that the speakers can reproduce audio faithfully, allowing listeners to enjoy their favorite tracks as intended by the artists.

Another key characteristic of the SP-BS21-LR is its dynamic range. Featuring a 5.25-inch woofer, this speaker offers deep, rich bass that complements the nuances of mid and high frequencies. The 1-inch silk dome tweeter is specifically engineered to produce crisp, clear highs, ensuring that even the most intricate details in your music are heard. This combination results in a well-balanced sound profile that appeals to a variety of musical genres.

The speakers have a power handling capacity of 100 watts, making them suitable even for larger rooms. The impedance rating of 8 ohms allows for compatibility with most audio receivers, making setup straightforward and hassle-free.

Another noteworthy technology incorporated into the PYLE SP-BS21-LR is its advanced crossover network, which ensures smooth transitions between the woofer and tweeter frequencies. This technology contributes to clarity in sound reproduction, allowing users to experience an immersive audio environment that makes every listening session enjoyable.

The versatility of the SP-BS21-LR is complemented by its aesthetic appeal; they are available in a sleek black finish that seamlessly fits into various decors. Lightweight yet sturdy, these speakers can be placed on bookshelves, stands, or even mounted on walls, providing flexibility for users.

In summary, PYLE Audio’s SP-BS21-LR bookshelf speakers combine thoughtful engineering, quality materials, and advanced audio technologies to produce remarkable sound within a compact framework. Whether you are looking to enhance your home audio system or simply need reliable speakers for personal use, the SP-BS21-LR stands out as a compelling choice that prioritizes performance and design.