Hunter Fan 23838 warranty Operation And Care, To Reverse The Flow Of Air, Checking Oil

Operation And Care

1.The fan pull chain controls power to the fan. The pull chain has four settings in sequence: High, Medium, Low, and Off.

•Pull the chain slowly to change settings.

•Release slowly to prevent the chain from recoiling into the blades.

2.For cleaning finishes, use a soft brush or lint-free cloth to prevent scratching. A vacuum cleaner brush nozzle can remove heavier dust. Remove surface smudges or accumulated dirt and dust using a mild detergent and a slightly dampened cloth. You may use an artistic agent, but never abrasive cleaning agents as they will damage the finish.

3.Clean wood finish blades with a furniture polishing cloth. Occasionally, apply a light coat of furniture polish for added protection and beauty.

To Reverse The Flow Of Air.

1.Move the directional lever down for down draft (see Fig. 16).

2.Move the directional lever up for up draft (see Fig. 16).

UP

DOWN

Directional Lever

Fig. 16

Checking Oil

1.Check oil level immediately after filling the reservoir and every 1 to 5 years thereafter.

2.To check oil, bend an ordinary pipe cleaner into 1/2” long hook and dip it into the oil reservoir (see. Fig. 17).

3.If the oil touches the end of the pipe cleaner, the fan has ample oil. If it does not touch, add SAE 10 non-detergent oil slowly until it touches the pipe cleaner (see. Fig. 18).

1/2"

Pipe

Cleaner

Pipe Cleaner

Fig. 17Fig. 18

	13
Hunter Fan Company

41532-01 • 11/05/14