Cut the Ceiling Hole, Install the Outlet Box

Preparing the Fan Site (continued)

Step 2 - Cut the Ceiling Hole

2-1. Locate the site for the ceiling hole directly below the joist or support brace that will hold the outlet box and fan.

2-2. Cut a 4” diameter hole through the drywall or plaster of the ceiling. You will use the hole to install the support brace and outlet box.

Step 3 - Install a Support Brace, If Necessary

Determine if there is a ceiling joist directly above the ceiling hole. If the joist is there, determine if it is positioned to allow you to recess the outlet box a minimum of 1/16” into the ceiling. If NOT, install a support brace as follows:

3-1. Attach a 2” x 4” support brace between two joists. Position it to allow you to recess the bottom of the outlet box a minimum of 1/16” into the ceiling.

3-2. Check the support brace to ensure it will support the full weight of the fan and light kit.

Step 4 - Install the Outlet Box

4-1. Obtain a UL-approved octagonal 4” x 1-1/2” outlet box, plus two #8 x 1-1/2” wood screws and washers, available from any hardware store or electrical supply house.

4-2. Orient the outlet box so that both the inner and outer holes in the box align with the joist or support brace.

4-3. Drill pilot holes no larger than the minor diameter of the wood screws (5/64”) through the inner holes of the outlet box.

4-4. Attach the outlet box directly to the support brace or joist with two #8 x 1-1/2” wood screws and washers. h e bottom of the outlet box must be recessed a minimum of 1/16” into the ceiling.

Step 5 - Prepare the Wiring

5-1. Make sure the circuit breakers to the fan supply line leads and associated wall switch location are turned off . If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel.

5-2. hread the fan supply line through the outlet box so that the fan supply line extends at least 6” beyond the box.

5-3. Attach the fan supply line to the outlet box with an approved connector, available at any hardware store or electrical supply house.

5-4. Make certain the wiring meets all national and local standards and ANSI/NFPA 70.

You have now successfully prepared your ceiling fan site. For instructions to install your ceiling fan, go to your fan manual and continue with Section 2 • Installing the

Ceiling Plate.

Steps 2 – 3

Step 4

Step 5

CAUTION: All wiring must be in

accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a

qualified electrician.

42888-01 • 03/01/10 • Hunter Fan Company

42888-01 specifications

The Hunter Fan 42888-01 is a striking ceiling fan that combines modern aesthetics with advanced technology, designed to enhance any indoor or covered outdoor space. This fan is a part of Hunter Fan's commitment to quality and innovation, ensuring both functionality and style for homeowners.

One of the main features of the Hunter Fan 42888-01 is its powerful yet quiet motor. This fan is equipped with a WhisperWind motor, which provides efficient airflow without the disruptive noise often associated with ceiling fans. The motor is designed to deliver a strong breeze in a whisper-quiet manner, making it perfect for any room, including bedrooms and living areas where tranquility is valued.

Another significant attribute of the 42888-01 model is its versatile size and design. With a 52-inch blade span, it is ideal for medium to large rooms. The fan boasts a contemporary look with a sleek finish and clean lines, allowing it to seamlessly blend into various decor styles, from modern to traditional. The fan's blades are made from high-quality materials ensuring durability and longevity, while their specific pitch design maximizes airflow efficiency.

The installation of the Hunter Fan 42888-01 is made easy with the included mounting hardware and detailed instructions. It can be installed in both standard and angled ceilings, catering to different home layouts. Additionally, this model features a dual mount system which allows for flush or pendant mounting, providing further flexibility in installation options.

Technology plays a significant role in this ceiling fan. The Hunter Fan 42888-01 is primarily compatible with smart home systems. Homeowners can connect the fan to various smart devices, enabling control through mobile apps or voice commands for added convenience. Moreover, the included remote control allows users to adjust the fan speed and light settings from the comfort of their couch or bed.

The 42888-01 also includes energy-efficient LED lighting, which not only provides ample illumination but also reduces energy consumption. LED bulbs last significantly longer than traditional incandescent bulbs, translating to lower maintenance costs and a reduced environmental footprint.

In conclusion, the Hunter Fan 42888-01 is a high-quality ceiling fan that embodies modern design and advanced functionality. With a powerful motor, versatile installation options, smart technology compatibility, and energy-efficient lighting, it stands out as a top choice for those seeking stylish comfort in their living spaces.