Hunter Fan 42834-01 installation manual Steps 8-6

8 • Completing Your Installation With a Bowl Light Fixture (Continued)

8-6. To attach the lower switch housing, connect the upper plug connector from the motor to the lower plug connector in the lower switch housing assembly.

Note: Both plug connectors are polarized and will only fit together one way. Make sure the connectors are properly aligned before connecting them. Incorrect connection could cause improper operation and damage to the product.

8-7. Place the lower switch housing assembly over the upper switch housing. Align the side screw holes in the upper and lower switch housings. Attach the lower switch housing to the upper switch housing with three housing assembly screws.

Note: In compliance with Canadian energy regulations, this ceiling fan contains a device that restricts the light output to a maximum of 190 Watts. Exceeding that limit or the marked limit on this product may result in fire hazard or improper operation.

Plug

Connector

Steps 8-6 – 8-7

Lower Switch

Housing

Plug

Connector

Detail

Housing

Assembly Screw

12

42834-01 • 01/27/10 • Hunter Fan Company