Front panel controls and features

•••

CD POWER ON LED INDICATOR

@ PHASE SHIFT

Use this switch to help compensate for time alignment problems in the system. Such problems usually result from having the subwoofer at a different distance from the listener than the other speakers in the system.

® INPUT GAIN CONTROL

After you have installed your system, tum this control to minimum. Turn the head unit on (and the subwoofer will turn on via the remote connection). Tum the head unit volume to about 2/3 full level.

Slowly turn up the subwoofer input gain control until you hear a small amount of distortion. Then reduce the level until the distortion is completely gone. Leave the control at this setting.

@BASSBOOST

The bass boost feature will increase the sound level the bass frequencies.

®LOW PASS FILTTER

This control permits you define the frequency range you want the subwoofer amplifier to receive. The subwoofer will reproduce all sound BELOW the frequency you set.

If the rest of your system is weak on the mids , you may wish to set this control relatively high. If the midrange is well covered by the rest of your system, you will probably want the subwoofer to only receive lower frequency signal.

®REMOTE LEVEL CONTROL PORT

Attach the included remote level control to control the volume level of the subwoofer independently.

(j)PROTECT LED INDICATOR

Rear panel controls and features

......

•

CDLOW LEVEL RCA INPUTS

Low level inputs are the recommended way to introduce the audio signal to the subwoofer if RCA outputs are present on your head unit or other signal source (such as a sound processor).

@HIGH LEVEL (speaker level) INPUTS

If your head unit does not have RCA outputs, you can use the speaker outputs for the audio source for the AQTB8. Use the supplied cable

and connect the outputs properly as shown in the connection diagram in this manual .

®FUSE

The fuse is rated at 15A. Do not use a fuse with a different value and NEVER replace the fuse with a wire or coin.

@POWER TERMINALS

3- AQTB8 Owner'sManual

AQTB8 Owner'sManual-4

AQTB8 specifications

The PYLE Audio AQTB8 is a high-performance marine speaker designed to enhance the audio experience in a rugged, outdoor environment. Known for its durability and exceptional sound quality, the AQTB8 is an ideal choice for boating enthusiasts, off-road adventurers, and outdoor sports lovers.

One of the standout features of the PYLE AQTB8 is its waterproof construction. With an IPX6 rating, these speakers are engineered to withstand harsh weather conditions, including rain and splashes, making them perfect for installation on boats, jet skis, and in other marine settings. This protection allows users to enjoy their favorite tunes without worrying about water damage.

The AQTB8 also boasts a powerful 200-watt peak power output, providing sufficient volume and clarity for any outdoor setting. Its 8-inch woofers deliver deep bass responses, while the 1-inch titanium dome tweeters ensure crisp highs. Together, they create a well-balanced audio profile that enhances both music and voice clarity, making it an excellent choice for those who love to listen while on the move.

In addition to its powerful audio performance, the AQTB8 features a sleek and stylish design. The speakers come with a modern grille that not only protects the internal components but also adds a polished look to any installation. The white finish complements various boat aesthetics, ensuring that it blends seamlessly into the marine environment.

Another notable characteristic of the PYLE AQTB8 is its ease of installation. Designed for versatility, these speakers come with a complete mounting kit, making it straightforward for users to set them up in various locations. Whether mounted on the boat’s dashboard, under the awning, or even in outdoor recreational vehicles, the AQTB8 can adapt to different setups.

PYLE Audio also incorporates advanced technologies in the AQTB8. The speakers feature a built-in crossover network that helps to efficiently distribute audio frequencies between the woofers and tweeters. This technology ensures that the sound output is optimized for various types of music, delivering a more enjoyable listening experience.

Overall, the PYLE Audio AQTB8 combines advanced marine technology, exceptional audio performance, and durable construction to meet the demands of outdoor lifestyles. Whether you are cruising on a boat or enjoying a beach party, the AQTB8 is designed to deliver a premium sound that keeps the good times rolling.