Attaching the lower switch housing

3.Assemble the upper switch housing to the mounting plate using the three screws and lockwashers which you removed from the mounting plate. Tighten the screws securely.

CAUTION: Make sure the upper switch housing is se- curely attached to the switch housing mounting plate. Fail- ure to properly attach and tighten all three housing assem- bly screws could result in the switch housing and light fix- ture falling.

1.Connect the upper plug connector from the motor to the lower plug connector in the lower switch housing assembly. See Fig- ure 17.

NOTE: Both plug connectors are polarized and will only fit to- gether one way. Make sure that both connectors are properly aligned before connecting them together. Incorrect connec- tion could cause improper operation and damage to the prod- uct.

Notch in	Fitter Cover
Globe	Fitter
Assembly

Globe Assembly

Figure 18 - Installing the globe assembly

installing without the light fixture

1.	Install the upper switch housing as shown in the attaching
	the upper switch housing section.
2.	Disconnect the two single plug connectors in the lower switch
	housing. Place the dummy terminals (in the sack parts) on the
	end of each single plug connector. The female dummy termi-

Lower Plug

Connector

Housing

Assembly

Screw

Upper Switch

Housing

Upper Plug

Connector

Lower

Switch

Housing

nal must be placed on the male plug connector and the male

dummy terminal on the female plug connector.

3. Remove the fitter assembly from the lower switch housing by

removing the two screws inside of the fitter as shown in Figure

19.

Figure 17 - Connecting the plug connectors

2.Place the lower switch housing assembly over the upper switch housing. Align the side screw holes in the upper and lower switch housings. Attach the lower switch housing to the up- per switch housing with three #6-32 x 3/8" housing assembly screws. See Figure 17.

installing the light fixture

1.Install the included CFL bulb.

2.Align the notches in the globe assembly with the bumps on the fitter.

3.Twist the globe assembly clockwise until it locks in place.

4.Be sure that the holes in the fitter cover and globe assembly align as shown in Figure 18. If they do not, remove the globe assembly and begin with step 2 in a different position.

Fitter

Remove these screws

Figure 19 - Removing the fitter assembly

4.Install the lower switch housing as shown in the attaching the lower switch housing section.

5.Install the cap and plug button as shown in Figure 20.

Cap

Plug Button

Figure 20 - Installing the cap and plug button

41877-01 06/14/2007

41877-01 specifications

The Hunter Fan 41877-01 is a remarkable ceiling fan that seamlessly blends style with functionality, making it a popular choice for homeowners looking to enhance their indoor spaces. This ceiling fan is designed to provide both comfort and aesthetic appeal, embodying Hunter's dedication to quality and innovation.

One of the standout features of the 41877-01 is its sleek, contemporary design. The fan is available in a variety of finishes, allowing it to complement a range of interior styles from modern to traditional. The blades are crafted from durable materials and are expertly engineered to maximize airflow, ensuring a comfortable environment regardless of the season.

This model is equipped with Hunter's WhisperWind® motor technology, well-known for its powerful yet quiet operation. This means you can enjoy a cooling breeze without the distracting noise that some ceiling fans produce. The motor is also made to last, providing reliable performance whether used in summer or winter mode.

Another key characteristic of the Hunter Fan 41877-01 is its energy efficiency. It is crafted with energy-saving technologies that allow it to operate with reduced energy consumption, making it an environmentally friendly choice. This not only helps reduce electricity bills but also supports sustainable living practices.

The fan comes with different speed settings, allowing users to customize their comfort level. Whether you need a gentle breeze for a relaxing evening or a stronger airflow during hot summer days, the 41877-01 adapts easily to your preferences. Furthermore, the fan can often be integrated with smart home systems, offering remote control capabilities for added convenience.

Installation is straightforward, supported by a user-friendly manual, making it accessible for those who prefer a DIY approach. The fan typically comes with all necessary hardware, ensuring a hassle-free setup.

In conclusion, the Hunter Fan 41877-01 embodies a perfect fusion of design, efficiency, and technology. Its stylish appearance, quiet operation, energy-saving features, and customizable settings make it a top choice for any room in the house. Whether you're looking to improve indoor air circulation or simply want to elevate the aesthetic of your space, this fan is an excellent investment for comfort and style.