14
5. When connecting regulator assembly to the valve,
hand tighten the quick coupling nut clockwise to a
complete stop. Do not use a wrench to tighten. Use
of a wrench may damage the quick coupling nut and
result in a hazardous condition.
6.Open the tank valve fully (counterclockwise). Apply
the soap solution with a clean brush to all gas
connections. See below. If growing bubbles appear in
the solution the connections are not properly sealed.
Check each fitting and tighten or repair as necessary.
7. If you have a gas connection leak you cannot repair,
turn gas OFF at supply tank, disconnect fuel line
from your grill and call 1-800-913-8999 or your gas
supplier for repair assistance.
8. Also apply soapy solution to the tank seams. See
below. If growing bubbles appear, shut tank OFF
and do not use or move it! Contact an LP gas
supplier or your fire department for assistance.
To disconnect L.P. gas cylinder:
1.Turn the burner valves off.
2.Turn the tank valve off fully (turn clockwise to stop).
3.Detach the regulator assembly from the tank valve
by turning the quick coupling nut counterclockwise.
üSpecified clearance maintained 24”(61cm) from
combustibles.
üAll internal packaging removed.
üKnobs turn freely.
üBurners are tight and sitting properly on orifices.
üPressure regulator connected and set. Gas
connections to grill using hose & regulator
assembly provided (pre-set for 11.0”water
column).
üUnit tested and free of leaks.
üUser informed of gas supply shut off valve
location
USER, PLEASE RETAIN THIS MANUAL FOR
FUTURE REFERENCE.
PROPANE CYLINDER CAUTIONS
a)Do Not store a spare LP-gas cylinder under or
near this appliance.
b)NEVER fill the cylinder beyond 80 percent full.
c)If the information in “a”and “b”is not
followed exactly, a fire or explosion causing
death or serious injury may occur.
Gas Hook –Up continuedInstaller Final Check List