Hunter Fan 53095, 53090, 53094, 53091 operation manual Mounting Options

Page 4

WALL

34O CEILING

If you have a flat ceiling:

Hang your fan by a standard downrod (included).

If you have an angled ceiling:

1.You will need a longer downrod (sold separately).

2.If your ceiling angle is greater than 34°, you will also need an Angled Mounting Kit (sold separately).

Standard	OPTION

Mounting	1

Angled	OPTION

Mounting	2

Mounting Options

Support
Structure
Standard	Ceiling
Mounting	Outlet Box
Style	(required)

www.HunterFan.com	1.86688.268830.1936326
Support
Structure
	Ceiling
	Outlet Box
	(required)
Angled
Mounting
Style

Use the three steps below to determine if your ceiling angle is greater than 34°

123

34°

FOLD PLACE SLIDE

on dotted lineagainst walltoward ceiling

Guide Touches		Guide Touches Wall
BOTH Ceiling & Wall		but NOT Ceiling

Use Standard Mounting	Use Angled Mounting
or Low-Profile Mounting	to hang the fan from a

UA T I

S

T

	1
	N
O
I

You need ONLY a Longer Downrod

*most common

UA T I

S

T

	2
	N
O
I

You need BOTH a Longer Downrod & an Angled Mounting Kit

to hang the fan from a flat ceiling.

vaulted or angled ceiling.

4

M0043-01 • 10/22/13 • © Hunter Fan Company

Image 4

Contents Table of Contents ? ?What to Expect with Your Installation Tools Needed Mounting Options Make sure all four 4 bumpers Are still attached Ceiling BracketFor angled ceilings, point Opening toward peak Preparation Downrod Hand Tighten Put the wires and downrod through FanWiring Canopy HolesBlades Switch Housing Feed the wire plug through the centerPlugs from the upper and lower Light KitThrough the hole in the light kit Keeper Install a light bulb in each socketChain Maintenance & Cleaning Customer serviceTroubleshooting Fan doesn’t work