ACCESSORIES
SECTION 4: ACCESSORIES
Some aftermarket accessories can be installed on this machine that could cause it to function improperly, increasing the risk of serious personal injury. To minimize this risk, only install accessories recommended for this machine by Grizzly.
NOTICE
Refer to the newest copy of the Grizzly Catalog for other accessories available for this machine.
The quickest tool for smoothing freshly sheared metal edges. Comes with two blades, one for steel and aluminum and one for brass and cast iron.
H5614—Wire Gauge US Standard
Calibrated for sheet metal sized from 0 to 30 gauge. The front is marked with gauge sizes, the back is marked with actual inch measurements.
Figure 22. H5614 Wire Gauge.
H5958—Sheet Metal Pliers
For bending and forming sheet metal. Jaws are 3⁜1⁄2" wide. Rubber grips. Overall length is 8". Ideal for HVAC Installers.
Figure 20. G5618 Deburring tool.
Figure 23. Model H5958 Sheet Metal Pliers.
T23036 37" Foot Shear |