Grizzly T23036 owner manual Service, Troubleshooting

SECTION 6: SERVICE

Review the troubleshooting and procedures in this section to fix your machine if a problem develops. If you need replacement parts or you are unsure of your repair skills, then feel free to call our Technical Support at (570) 546-9663.

Troubleshooting

Operations

Symptom			Possible Cause		Possible Solution
Won't		cut	1.	Improper blade gap distance.	1.	Widen gap to accommodate thicker gauge material.
material.			2.	Cut exceeds machine capacities.	2.	Make cuts within the capacity of the machine.
Cuts	aren't		1.	Blade gap unequal across length.	1.	Adjust blade gap to be equal across length (Page
square.						16).
			2.	Too much bow in blade.	2.	Correct blade bow (Page 22).
			3.	Inadequate hold-down pressure.	3.	Adjust gap of hold-down (Page 16).
			4.	Uneven contact with guides.	4.	Maintain consistent contact with guides.
Poor	quality	of	1.	Dull blades.	1.	Replace or sharpen blades.
cuts,	ripping	or	2.	Poor blade gap set up.	2.	Adjust blade set up (Page 16).
tearing.			3.	Loose gibs.	3.	Remove play from gibs (Page 22).

T23036 37" Foot Shear -21-