Grizzly G9956 instruction manual Site Planning

Page 10

Site Planning

Site planning is an important step to maximize the effectiveness of the double air filter. Air circulation must be thought out and all obstructions in the air path considered.

The G9956 Double Air Filter is supplied with a pair of directional vents which allows the user to direct the flow of circulation. However, while the vents will optimize a good layout, as in Figure 3, they will have a limited effect when the double

air filter is placed incorrectly in the room as in Figure 4. When placed too close to obstruc- tions, the velocity of the air is lost and circulation

Filter

Figure 3. Good circulation. The air filter place-

ment promotes circular air motion.

is diminished. The following is a list of things to keep in mind when determining the placement of the air filter:

•Study your shop layout to determine the best location for the double air filter. Air flow that is obstructed will cause a short cycle effect pro- ducing unsatisfactory results. There must be a clearance of at least 12" from any obstruc- tions in front and back of the unit.

•Place the air filter in front of high dust produc- ers like sanders or near areas where sanding will take place.

•Do not place the double air filter in the path of garage doors or where it may impede trans- port or movement of any other object.

•Place the unit in a location that provides easy access to turn on, clean and maintain.

Filter

Figure 4. Poor circulation. Placed too close to

 

 

the wall, the air circulation short cycles leaving

 

 

much of the room unfiltered.

 

 

G9956 Heavy-Duty Double Air Filter

G9956 Heavy-Duty Hanging

-8-

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Heavy-Duty Double Air Filter Page Table of Contents Safety Safety Instructions for Power ToolsAMP Rating Length 25ft 50ft 100ftAdditional Safety for Double Air Filters Contact Info General InformationCommentary Machine DataCircuit Breaker Requirements Circuit Requirements110V Operation Plug TypeInventory SET UPUnpacking Hardware Bag Inventory use page 8 to idenSite Planning Mounting Preparation Filter CapacityEye Bolts Hanging the Filter Hardware Needed not included QtyOperations OperationsFor manual ON/OFF use To set the fan timer Speeds and TimerTo set the fan speed Maintenance Cleaning the FiltersAftermarket Accessories Reference InfoG9956 Parts Breakdown G9956 Parts List DescriptionG9956 Wire Diagram CAP 20 MFD Run CapacitorWarranty and Returns Warranty Card Grizzly INDUSTRIAL, INC BOX BELLINGHAM, WAPage Call Today For a Free Full Color Catalog
Related manuals
Manual 28 pages 17.04 Kb

G9956 specifications

The Grizzly G9956 is a state-of-the-art milling and drilling machine that seamlessly combines power, precision, and user-friendly features, making it an indispensable tool for both hobbyists and professional machinists. This model is designed specifically for those who require heavy-duty performance without sacrificing accuracy or ease of use.

One of the standout features of the G9956 is its robust construction. The machine is built with a solid cast iron frame, which provides excellent stability and minimizes vibrations during operation. This is particularly important for achieving precise cuts and ensuring a superior finish on various materials, including wood, metal, and plastic. The machine’s weight contributes to its stability, allowing for better control while milling or drilling.

Another notable characteristic is its impressive motor capacity. Equipped with a powerful variable speed 3/4 HP motor, the G9956 can easily handle tough jobs without bogging down. The variable speed control allows users to adjust the RPM settings seamlessly, enabling optimal performance across a range of applications. Users can select lower speeds for drilling and higher speeds for milling, offering flexibility based on specific requirements.

The G9956 also features a spacious worktable with T-slots, allowing for easy clamping of workpieces. The table measures 10 inches by 50 inches, providing ample working space for larger projects. Its tilting capabilities add further versatility, enabling angle milling for complex shapes and ensuring perfect alignment for various tasks.

In terms of safety and convenience, the G9956 is designed with user engagement in mind. It includes an emergency stop button for quick shutdown and an easily accessible control panel, ensuring that operators can make adjustments on the fly without hindrance.

For enhanced precision, the G9956 comes with a digital readout system that displays exact measurements, elevating the accuracy of both milling and drilling operations. The machine also supports a range of attachments and accessories, expanding its capabilities further.

In summary, the Grizzly G9956 is an exceptional milling and drilling machine that stands out due to its powerful motor, stability, versatility, and user-friendly features. It represents a perfect blend of technology and practicality, making it an ideal choice for a wide range of machining tasks. Whether for personal projects or professional use, the G9956 meets the needs of today’s demanding machining environment with excellence.
Top Page Image Contents