Grizzly G9956 instruction manual Filter Capacity, Mounting Preparation, Eye Bolts

Page 11

Filter Capacity

The G9956 Heavy-Duty Double Air Filter is designed to recirculate the entire volume of air in a 20' x 20' x 8' room approximately 26 times in one hour. For the best filtering effect, the vol- ume in a room should be recirculated at least 6-8 times every hour.

To calculate the recirculating rate for a given volume:

Step 1. Calculate, how long it takes to circulate all the volume of air in a room with the double air fil- ter; where W = Width, L = Length and H = Height of your room, in feet. The rate of air movement for the air filter is 1400 cubic feet per minute.

W' x L' x H' = Minutes for circulating 1 time 1400

Step 2. Calculate how many times per hour the volume is recirculated through the double air filter by dividing 60 minutes by the amount of time it takes to circulate the volume once. The result is listed as times per hour.

Step 1: 20' x 20' x 8' = 5000

= 2.28 Minutes

 

1400

1400

 

Step 2:

60

= 26.3 Times per Hour

 

2.28

 

 

 

 

 

 

 

 

 

 

 

 

Mounting

Preparation

It is very important that the double air filter is supported properly. Please use these guidelines when preparing to mount the unit.

•For the sake of clarity, the surface where the eyebolts attach will be called the top through- out the manual.

•Make sure that an electrical outlet with a properly grounded receptacle is available at your location of choice.

-9- Heavy-Duty Hanging Air Filter

•The double air filter must be supported by joists when hanging. These joists should be capable of supporting at least 150 lbs. DO NOT attach the double air filter to sheet rock, press board or paneling. These cannot sup- port the filter and it may fall.

•To avoid hitting your head on the double air filter, make sure there is enough clearance between the unit and the ground (at least seven feet). This is especially important in a basement. If possible, position the air filter in an area that has little or no foot traffic but still offers easy access to the switch and filters.

Eye Bolts

 

Components and Hardware Needed

Qty

Eye bolts

4

Hex Nuts 1⁄4"-20

4

Tools Needed

 

Wrench 12mm

1

To attach the eye bolts:

 

1.If the nuts are not already on the eye bolts, thread one onto each eye.

2.Thread one eye bolt into each hole on the top of the double air filter. Use as much of the available thread as possible.

3.Tighten the nuts on each eye bolt until the eyes will not move by hand. DO NOT over tighten.

G9956 Heavy-Duty Double Air Filter

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Heavy-Duty Double Air Filter Page Table of Contents Safety Instructions for Power Tools Safety25ft 50ft 100ft AMP Rating LengthAdditional Safety for Double Air Filters Machine Data General InformationCommentary Contact InfoPlug Type Circuit Requirements110V Operation Circuit Breaker RequirementsHardware Bag Inventory use page 8 to iden SET UPUnpacking InventorySite Planning Eye Bolts Filter CapacityMounting Preparation Hardware Needed not included Qty Hanging the FilterFor manual ON/OFF use OperationsOperations To set the fan speed Speeds and TimerTo set the fan timer Cleaning the Filters MaintenanceReference Info Aftermarket AccessoriesG9956 Parts Breakdown Description G9956 Parts ListCAP 20 MFD Run Capacitor G9956 Wire DiagramWarranty and Returns Warranty Card BOX BELLINGHAM, WA Grizzly INDUSTRIAL, INCPage Call Today For a Free Full Color Catalog
Related manuals
Manual 28 pages 17.04 Kb

G9956 specifications

The Grizzly G9956 is a state-of-the-art milling and drilling machine that seamlessly combines power, precision, and user-friendly features, making it an indispensable tool for both hobbyists and professional machinists. This model is designed specifically for those who require heavy-duty performance without sacrificing accuracy or ease of use.

One of the standout features of the G9956 is its robust construction. The machine is built with a solid cast iron frame, which provides excellent stability and minimizes vibrations during operation. This is particularly important for achieving precise cuts and ensuring a superior finish on various materials, including wood, metal, and plastic. The machine’s weight contributes to its stability, allowing for better control while milling or drilling.

Another notable characteristic is its impressive motor capacity. Equipped with a powerful variable speed 3/4 HP motor, the G9956 can easily handle tough jobs without bogging down. The variable speed control allows users to adjust the RPM settings seamlessly, enabling optimal performance across a range of applications. Users can select lower speeds for drilling and higher speeds for milling, offering flexibility based on specific requirements.

The G9956 also features a spacious worktable with T-slots, allowing for easy clamping of workpieces. The table measures 10 inches by 50 inches, providing ample working space for larger projects. Its tilting capabilities add further versatility, enabling angle milling for complex shapes and ensuring perfect alignment for various tasks.

In terms of safety and convenience, the G9956 is designed with user engagement in mind. It includes an emergency stop button for quick shutdown and an easily accessible control panel, ensuring that operators can make adjustments on the fly without hindrance.

For enhanced precision, the G9956 comes with a digital readout system that displays exact measurements, elevating the accuracy of both milling and drilling operations. The machine also supports a range of attachments and accessories, expanding its capabilities further.

In summary, the Grizzly G9956 is an exceptional milling and drilling machine that stands out due to its powerful motor, stability, versatility, and user-friendly features. It represents a perfect blend of technology and practicality, making it an ideal choice for a wide range of machining tasks. Whether for personal projects or professional use, the G9956 meets the needs of today’s demanding machining environment with excellence.
Top Page Image Contents