You can upload your recorded video footages and photos to a PC by connecting the
ATC9K to your PC using the PC Application. First, you can insert the installation CD
1213
Application Update
While you are connecting to the internet, the PC application will check for any updates automatically. You can either accept it or update the application manually by pressing the update icon at the top right corner.
XIV) Connecting to a Monitor
You can playback your recorded video footages and photos on a high definition enabled
monitor using the HDMI cable provided.
1. Turn the ATC9K and the monitor off.
2. Connect your ATC9K to your monitor using the HDMI cable.
3. Turn the monitor and ATC9K on.
Recharge the Battery via USB
1. Turn the camera off, then plug the camera with the rechargeable battery to a computer with the USB cable provided.
2. The red LED will light up to show the battery is charging.
3. The red LED will be turned off when the battery is fully charged.
NOTE: The rechargeable battery will be fully charged
in 2-3hours.
XII) MicroSD Card Insertion /Rmoval Insert
1. Turn the camera off.
2. Unlock the end latch to open the camera.
3. Ensure the microSD card terminals are facing down, then insert it carefully and completely until
it clicks in place. 4. Close the camera and lock the latch.
Remove
1. Turn the camera off.
2. Unlock the end latch to open the camera.
3. Push the card until it clicks, then pull the card out.
4. Close the camera and lock the latch.
NOTE:
- Ensure the card is inserted correctly.
- Do not touch the connect terminals on the back of the microSD card. - The card may be damaged if it is not fully inserted.
- The card and the data may be damaged if the microSD card is inserted or removed while the camera is on.
- Do not touch the flat cable as this may seriously affect the camera performance and functions.
- The camera supports microSD/SDHC Class 4 cards or above and compatible up to 32GB. MicroSD cards with lower classes may cause performance drop during recording.
XIII) Connecting to a Computer

Firmware update

1.Visit Oregon Scientific website atc.oregonscientific.com/ to download the latest firmware.

2.Unzip the package and copy the unzipped file to the root folder of the microSD card.

3.Insert the microSD card to the ATC9K and turn it on.

4.To confirm the update, press . The camera will be switched off.

5.Press to restart the camera.

XI) Power Supply

Battery Replacement

1.Unlock the rear of the unit by lifting the latch.

2.Insert the rechargeable battery into the battery slot as indicated until it clicks in place.

3. If you want to release the rechargeable battery, turn the battery hinge downwards until it comes out from the slot.

4.Close the battery door firmly before closing the latch.

NOTE:

When the battery is low, the battery low icon will appear on the LCD screen and the red LED will light up.

CAUTION

There is a risk of explosion if you replace the battery with an incorrect type. Dispose of used batteries according to your local environmental guidelines. Do not puncture, drop, or incinerate the battery.

Recharge the Battery by External Charger (sold separately)

1. Plug the charger to the power supply and slot the battery into the

 

charger as indicated on the charger.

2.

The LED on the charger will light up as the battery starts to recharge.

3.

The LED will be turned off when the battery is fully charged.

that comes with the packaging. Then it will direct you via the web browser to the web site where you can download the latest PC Application. You can always check for any updates with this URL - atc.oregonscientific.com. 1. Turn the ATC9K on. 2. Connect the ATC9K to a PC via the USB cable. 3. The ATC9K will be connected as a USB Mass Storage

Device.

4.You can then manage your videos and photos by launching the PC application.

User Profile

1.To start, choose your own account to login with your password or simply create a new account if you are using the PC application for the first time.

You can always access your profile information by clicking the top-right icon after you login to the application.

2.User accounts and profiles are password protected. A password hint question and answer fields will be added in case users forget their passwords.

Import Videos and Photos

1.After the users log into their accounts the PC program will ask the users automatically whether they would like to import videos and photos onto the computer if the camera is on and is connected to the PC via USB.

2.Users will have to option to either keep or delete the source files after importing.

(1)

(2)

Video and Photo Viewer

1.The Viewer will display both videos and photos.

2.When the viewer is showing video files, the following screen will be shown:

I.A video player

II.A video timeline with a dragger which you can manually drag the position reveal certain instances of the video.

III.A volume control slider. The audio will be muted when the speaker icon

under the volume slider is pressed . The icon will be changed as indicated.

IV. Video control buttons – Start of the video, Fast Reverse, Play, Fast Forward and end of the video.

V.Multiple clicks on Fast Reverse and Fast Forward triggers x2, x4, x8 speeds of reverse and forward.

VI. A timer showing the video duration and lapsed time.

VII. A line showing the title of the video.

VIII. An information icon which shows the general information of the video when it’s been clicked. Users are able to edit the title and description of the video. Moreover, users are able to import KML to the corresponding video which is imported from the local drive instead of the camera.

IX. A full screen button .

X. A snapshot button .

3.When the viewer is operated for photo files, the following will be shown:

I. A photo viewer

II. The name of the photo.

III.An information icon which shows the general information of the photo when it has been clicked. Users are able to edit the title and description of the photo. Moreover, users are able to import KML to corresponding photo which is imported from local drive instead of the camera.

IV. The index of the photo

V. A previous button

 

VI. A next button

 

VII. A full screen button

.

VIII. A rotation button

which users can rotate photos in 0, 90, 180 and 270

degrees. The changes in rotation will save as settings but will not affect the original file.

Google Map

1.If the GPS module (Sold Separately) is inserted to the camera and the GPS module is turned ON, the camera will sync the GPS data on to a .MAP file. This part of operation will be covered in the corresponding user manual.

2.If the GPS module is not inserted, the Google Maps functions will not be activated. However, you can always import your own KML to activate the GPS information in Google Maps.

3.The Google Maps function requires an internet connection. If the connection is barred or disconnected, the Google Maps function will not be operational until the internet connection is restored.

File Management

1.Within the File Management, videos and photos are displayed separately into 2 lists.

2.All videos and photos imported will be displayed within the “Library” tab.

3.The videos and photos that were imported last time (no matter the files are assigned to album or not) are displayed in the “Last Import” tab.

4.Users are able to create , delete and rename (rollover and click in front of the album name) albums.

5.Same files can fall into different albums.

6.Files deleted via the “Library” and “Last Import” tabs are deleted physically while files deleted via other album tabs are just tags removal but not physically deleted.

7.Users can import manually by clicking the arrow icon and either import from the camera or from local drives.

8. The search icon triggers the search function with the following criteria:

I. Keyword search of title

II. Keyword search of description

Multiple keywords are allowed with their entries separated by commas.

III. Filename

Multiple keywords are allowed with their entries separated by commas.

IV. Video Duration

With options: Any durations; Less than/More than 0.5min; 1min; 2min; 5min; 10min; 20min; 30min (if user chooses “Any durations”, the second pulldown menu won’t be shown.)

V. Album

With options: all, library and albums that the user created.

VI. Date

With options: anytime, past 24 hours, past week, past month, past year, specific date (if user is not choosing a specific date, the second and third pulldown menu won’t be shown.)

9. Video File Listing shows:

I. The total number of videos and file size of an individual tab.

II.A pulldown menu for users to sort the files by title, filename, file size, duration and date (time).

III.Thumbnails of the first frames of every individual video for you to playback.

IV. Details of the videos.

V. An edit info icon to edit the title and descriptions of videos.

VI. A trash icon to delete files or remove tags.

VII. Multiple item selections are allowed by ctrl-click or shift-click.

VIII. You can drag and drop from lists to albums on the left hand side.

14

15

16

Multiple keywords are allowed with their entries separated by commas.

17

18

10. Photo File Listing shows:

I. The total number of photos and file size of an individual tab.

II.A pulldown menu for users to sort the files by title, filename, file size, and date (time).

III.Thumbnails of every individual photo for you to view.

IV. Details of the photos.

V. An edit info icon to edit the title and descriptions of photos.

VI. A trash icon to delete files or remove tags.

VII. Multiple item selections are allowed by ctrl-click or shift-click.

VIII. You can drag and drop from lists to albums on the left hand side.

Data Graphs

1.Data graphs are plotted by the data in the .MAP file.

2.There are 3 kinds of data graphs; speed vs time, acceleration vs time and distance vs time represented by 3 buttons; SPD vs T, ACC vs T and DST vs T.

3.Graphs are not available when handling photos.

4.The white lines shown are corresponding average values. (not applicable to Distance)

G Sensor Viewer

1.This viewer is a pseudo-sphere showing resolved accelerations with directions and magnitudes, which are represented by the black line.

2.The length of the lines is magnitude.

3.The motions and the length variations of the line will follow the data from the .MAP file.

19

Playback

1.Select the video or photo you want to play by pressing “Left” and “Right”

button .

2.Press “Play/Pause” button to play.

3.During video playback, press “Play/Pause” , to pause or resume playback, press “Left” and

“Right” button to activate fast forward and fast reverse.

4.To exit to thumbnail view, press “Menu” button .

Delete Video or Photo

1.Press “Menu” button to activate the submenu.

2.Select “Delete”.

3.Confirm the deletion by pressing “Play/Pause” button .

Switch between Video and Photo

 

 

 

 

1.

Press “Menu” button

to activate the

 

 

 

 

 

submenu.

 

 

 

 

 

2.

Select “View Videos” or “View Photos” by

 

 

 

 

 

press the “Right” button .

 

 

 

 

3.

Confirm by pressing “Play/Pause” button

 

 

 

.

 

 

 

 

 

 

 

20

Slideshow

1.Press “Menu” button to activate the submenu when you are in the photo thumbnail view.

2.Select “Slideshow” by press the “Right” button .

3.Confirm by pressing “Play/Pause” button .

4.To exit the slideshow, press “Menu” button .

XV) Troubleshooting

There’s no display

Is the rechargeable battery properly installed?

Does the rechargeable battery need replacing?

After the ATC9K is connected to my PC, it cannot find the new drive in the ‘My Computer’ folder

Ensure each end of the ATC9K USB cable is properly and firmly connected.

Ensure your USB port is working properly. Try connecting another USB device into the port. If the other device does not work, the USB port may have a malfunction. In this case, contact your system manufacturer or the manufacturer of your USB card.

I can’t capture video footage

Ensure there is enough space in the microSD card; the display will tell you how much time left is available for video recording.

The remaining time is not accurate

The remaining time is an estimate.

The remaining time depends not only on the time recorded, but on the color density of the video footage. Under conditions with high contrast, such as outdoors, the actual time available will be less than under low-contrast conditions, such as indoors.

I can’t play the video footage on my television

Ensure each end of the HDMI cable is properly and firmly connected to

ATC9K and to your television.

Ensure the ATC9K and television are both turned on.

The sound is very low or there is no sound

Ensure to increase the volume of the speaker in the volume setting.

The ATC9K is specifically designed for extreme sports and is waterproof, it is for this reason that we have made the microphone less sensitive.

The LED keeps flashing while the rechargeable battery is charging

21

For some special circumstances, the mentioned situation means the rechargeable battery is fully charged.

Further Help

We make every effort to ensure the accuracy and appropriateness of the information provided on our products. We encourage you to contact our Technical Support Team at atc@oregonscientific.com with any problems and/or suggestions, or, call our Customer Service Department

at 1-800-853-8883. Our service representatives will be happy to help you.

Please note that the Technical Support Team cannot issue or authorize any RMA’s or replacements. For an RMA or replacement please contact our Customer Service Department.

Trademarks

HDMI, the HDMI logo and High-Definition Multimedia Interface are

trademarks or registered trademarks of HDMI Licensing LLC. Microsoft, Windows, Windows Vista and Window7 are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

Macintosh, Mac OS and iMovie are trademarks or registered trademarks of Apple Inc..

Intel and Pentium are trademarks or registered trademarks of Intel Corporation. SDHC and SDHC logo are trademarks of SD-3C, LLC.

Disclaimer

DEFINITION:

“Oregon Scientific” shall mean Oregon Scientific Global Distribution Limited, its subsidiaries, parent companies, affiliated companies, directors, officers,

employees, agents, representatives and distributors.

DISCLAIMER:

Oregon Scientific do not warrant against loss of any data (including data stored

on Product), and assume no liability for such loss. Purchaser assumes all liabil-

ity, and as such releases us from any liability, for any accident, injury, damage,

death, loss, illegal activity or any other claim that may occur resulting from or during use of the Product, whether or not such use is foreseeable by Oregon

Scientific.

ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION

22

OF THE APPLICABLE EXPRESS WARRANTY. ALL OTHER EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF NON-INFRINGEMENT, ARE DISCLAIMED TO THE MAXIMUM EXTENT ALLOWED BY THE APPLICABLE JURISDICTION.

All third party software provided with the Product is provided “AS IS”. Pur- chaser assumes the entire risk as to the quality, performance, accuracy and ef- fect of such software, and should it prove defective, Purchaser, and not Oregon

Scientific, assumes the entire cost of all necessary servicing or repair.

TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT WILL OREGON SCIENTIFIC BE LIABLE FOR ANY LOST DATA, REVENUE OR PROFIT, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, HOWEVER CAUSED REGARDLESS OF THE THEORY OF LIABILITY, ARISING OUT OF OR RELATED TO THE USE OF OR INABILITY TO USE THE PRODUCT, EVEN IF WE HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL OREGON SCIENTIFIC LIABILITY EXCEED THE AMOUNT PAID BY PURCHASER FOR THE PRODUCT.

The foregoing limitations will apply even if any warranty or remedy provided

herein fails of its essential purpose. Some jurisdictions do not allow the exclu-

sion or limitation of incidental or consequential damages, so the above limita- tion or exclusion may not apply to Purchaser.

All purchasers, users, and any or all parties involved or engaging in the use the Product understand and agree that:

Oregon Scientific do not promote or endorse use of the Product in high risk,

careless and / or dangerous actions.

Oregon Scientific are not responsible for personal injuries or property damage

incurred during such use.

Oregon Scientific are not liable for any use or misuse of the Product or any

video captured that may be considered illegal.

Oregon Scientific are not responsible for any illegal actions taken while record-

ing, attempting to record, or editing video that was captured with the Product. The Product’s primary purpose is for recording legal sports activities as seen by

all applicable laws and regulations.

23

 

Oregon Scientific, Inc.

19861 SW 95th Avenue

Tualatin, OR 97062, USA

Hotline: 1-800-853-8883

Service: http://us.oregonscientific.com/service

Website: http://us.oregonscientific.com

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

WARNING:

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

“ This Class B digital apparatus complies with Canadian ICES-003.”

Cet appareil mumérique de la class B est conforme à la norme NMB-003 du Canada” 24

This product has passed JIS7 Standard for Waterproof Test.

This product has passed EN60065:2002 performance test for vibration.

CAUTION

LASER RADIATION WHEN OPEN

DO NOT STARE INTO BEAM OR VIEW DIRECTLY

WITH OPTICAL INSTRUMENTS

INFORMATION FOR USERS

In accordance with European Directives 2002/95/CE, 2002/96/CE and 2003/108/CE on the restriction of the use of dangerous substances in electric and electronic equipment as well as their waste disposal.

The barred symbol of the rubbish bin shown on the equipment indicates that,

at the end of its useful life, the product must be collected separately from other waste. Therefore, any products that have reached the end of their useful life must be given to waste disposal centres specializing in separate collection of waste electrical and electronic equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one basis.

The adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated and disposal of in an environmentally compatible way contributes to preventing possible negative effects on the enviropment and health and optimises the recycling and reuse of components making up the apparatus.

Abusive disposal of the product by the user involves application of the administration sanctions according to the laws in force.

US P/N:300102714-00004-10

25

ATC9K US manual 16DEC R15.indd 2

12/16/11 3:52:43 PM

Page 2
Image 2
Oregon Scientific ATC9K quick start Firmware update, XI Power Supply, XV Troubleshooting