INSTALLATION INSTRUCTIONS KK-K9-F14-K
K9 TRANSPORTATION SYSTEM
TOOLS REQUIRED: |
| |
Power Drill | Wire Cutters / Crimping tool | |
Drill Bit Set | Ratcheting Wrench Extension | |
Standard & Metric Socket Sets | Torx Bit Set | |
Phillips Screw Driver | 4 ½” Hole Saw (Exhaust Fan Option) | |
Open End Wrench Set | Caulk Gun | |
HARDWARE: |
| |
QTY: DESCRIPTION: | PART #: | |
28 | ¼” x ½” Stainless carriage bolts | GSM32022 |
8 | ¼” x ¾” Stainless carriage bolts | GSM32024 |
64 | ¼” flanged serrated nuts | GSM30023 |
6 | ¼” x ¾” Hex head cap screw | GSM33001 |
6 | ¼” x 1 ½” Hex head lag screw | GSM33062 |
36 | #12 x ¾” Stainless sheet metal screws | GSM34177 |
24 | #10 x ¾” Stainless sheet metal screws | GSM34170 |
12 | #10 x ½” Stainless sheet metal screws | GSM34169 |
10 | #10 x ¾” Stainless machine screws | GSM34098 |
6 | #10 x ¾” Sheet metal screws | GSM33195 |
1 | Tube silver caulk | PRM97343 |
1 | 46” x 45 ½” Rubber Floor mat | |
10 | #10 x ½” Flat head sheet metal screws | GSM33150 |
Always!
¾Read all instructions before installing any
¾Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
¾Use hardware provided with install kit
For product support, visit the Install Instructions Section of our website at http://havis.com/Installation/Installation.html, email technicalsupport@havis.com or call